Replacement Water Inlet for 2002 Holiday Rambler Alumascape

Question

Question:

In need of replacement water inlet .3 hole , brass,the good one for2002 Holiday Rambler Alumascape trailer

asked by: Teri

0

Expert Reply:

If I'm understanding you correctly, you're looking for a replacement for the city water connection on your 2002 Holiday Rambler Alumascape trailer. I recommend using something like the Valterra Water Inlet for RVs # A01-0178LFVP which comes equipped with a brass check valve and a press on dust cap to keep your water connection free from dirt and debris when not in use. If you have a gravity fed fresh water tank, you can use the Valterra Flush Mounted Telescoping Water Inlet for RVs - True White - Gravity Fill # R920TW.

I have linked our entire selection of RV fresh water inlets for you to have a look at, as well, if you'd like to find a different color or style.

expert reply by: Erik B

0

Answer 1

It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…

view full answer...

Answer 2

The bags are different between the two kits so your best option would be just to go with the #AL88341 which comes with everything you would need Richard.

view full answer...

Answer 3

I recommend going with the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 10,000 lbs GTW, 1,000 lbs TW #BLU66FR to pull your Grand Design Imagine 2670MK RV. This is a very impressive weight distribution system that is much quieter…

view full answer...

Answer 4

Since your 2017 Grand Design Imagine 2500RL Travel Trailer has a GVWR of 6,995lbs the Lippert Electric Ground Control TT Automatic 5-Point Leveling System #LC672136 will fit perfectly. This system is designed for trailers with a GVWR of up to…

view full answer...

Answer 5

The Seaflo Diaphragm Pump for Boats and RVs - Variable Flow, #SE96FR has connections that allow it to connect to 1/2" lines but it does not come with a PEX ready fitting. I have contacted the Vendor to discuss options and they informed me that…

view full answer...

Answer 6

The max amperage draw of the MaxxAir MaxxFan Mini RV roof vent part #MA00-04401M that you referenced is 5 amps.

view full answer...

Answer 7

If you're just cutting a hole in the tank and adding the Valterra 90-Degree Drain Elbow - Flange x 3/4" Barb - Polypropylene Item #RF839 you could do so by sliding it through the hole and using the lip to keep it from coming out and then…

view full answer...

Answer 8

It sounds like you need Valterra Gray Water Drain Connector - 90-Degree - 1-1/2" FPT to 3/4" MPT Item #T01-0091VP. Or possibly Valterra 90-Degree Drain Elbow - 1-1/2" Female Swivel x 3/4" Barb Item #RF890. Or Valterra 90-Degree…

view full answer...

Replacement Water Inlet for 2002 Holiday Rambler Alumascape

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching