Ultra-Fab Products Skid Wheels - Frame Mount - UF48-979021 Review Video

I do have an option for you but the Curt Trailer Hitch Receiver part #13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle. This measurement…

I spoke to my contact at Dutton Lainson and they informed me that the Dutton Lainson Adapter plate part #DL24059 that you referenced is 7.7 inches long and 5.50 inches wide.

The Dutton-Lainson StrongArm Electric Winch w/ Remote #DL25019 has a die-formed base that allows for quick and easy mounting to a variety of surfaces. I've attached a photo to this answer that shows the holes in the base of this winch that…

The Kenda Karrier ST205/75R14 Radial Trailer Tire part #AM10235 which has a load range D which means it has a max capacity of 2,200 per tire at 75 psi and an 81 mph speed rating. It would work perfectly on a 14" x 5.5" wheel.

With square axles, neither of our over/under kits will be a fit to raise the height of the trailer so another option is to use longer hangers for the leaf springs. You will just want to confirm the hangar height. You may be able to use a hanger like…

We have skid wheels exactly for this issue. The skid wheels attach to your vehicle hitch frame and allow you to deflect the hit to your vehicle frame, bumper, or panels. This will help prevent dragging and protect your undercarriage from unnecessary…

The amount of cold cranking amps you need depends on how much you plan to lift/pull. The Badland Winch 2500 has an amp draw of 132amps at 2500 lbs, so any car battery should do. I would recommend including a charger in your setup. I recommend the…

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…

In order to install the Carr Custom-Fit Side Steps - Hoop II #CARR102521, you may need to use pliers or vice grips to squeeze the bracket enough to get the nut started on the bolt, then torque down accordingly. This info was given directly from the…

On the Swagman Original 4 Bike Towing Rack for 2" Trailer Hitches - Tilting #S64675, the distance from the hitch pin to the hitch ball is 25 inches center on center. If you want to measure all the way to the end, it will be about 26-1/2 inches…

I would not recommend adding a receiver to the end of the Swagman Original Towing Bike Rack, #S64675. This bike rack comes with a hole that allows you to add a hitch ball with a 3/4 inch diameter like part #19256. If you want a 2 inch hitch ball,…

The Redarc Tow Pro Elite part #RED44FR that you referenced can be installed in your 2015 Volkswagen Touareg and would be an excellent option for a brake controller but there are a few relays needed to install the controller that you'll only be…