Tow Ready Hitch Fabrication Parts - Receiver Tube - 80948 Review Video

The current Torklift tie down part #TLD3101 that you have installed on your 1997 Dodge Ram 3500 only fits if you have the factory hitch. If you go with the SuperHitch part #TLD1100 you would need to change your rear tie down to the part #TLR3503.

For a 12,000 lb. electric car trailer winch like the Bulldog Winch Trailer Winch part #BDW10040, I recommend a standard 12 volt lead acid battery rated up to at least 650 cold cranking amps (CCA). As long as the battery is rated up to 650 CCA then…

Yes, the Superwinch Hitch Mounted Winch Mounting Plate with Handles #SW2050 is compatible with your Superwinch S9000 front mount winch. Attached is a review video for you to check out.

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

The Buyers Products Black Receiver Tube #337RT25848B that you referenced weighs 27 lbs. It has a max trailer weight capacity of 20,000 lbs.

The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long #RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of…

We don't have a 7-way splitter like the photo you sent. We instead for applications just like yours recommend using the Mighty Cord 5th Wheel/Gooseneck Wiring Harness w/ 7-Pole Connector - 7' Long #A10-7007 or the 10 foot long #A10-7010. This…

I went to our warehouse to measure the actual wall thickness of the Tow Ready Combo Bar #80948 and the similar Curt #C49480, both of which are 48-inches long with a raw finish. With a digital caliper I measured the wall thickness of the Tow Ready…

The 3" hitches Ford is using are throwing everyone for a bit of a loop. With that being said, I do have a couple options for you to check out. First will be the TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch #TLE1636.…

I am a bit confused, because I was under the impression that Ford didn't begin offering the 3 inch hitch until the 2017 model year. As long as the hitch on your 2016 Ford truck is the 3 inch factory receiver, the Torklift #TLE1636 will be…

For a 48" hitch extension that fits a 3" receiver you're going to want the TorkLift Cannon Hitch Extension item #TLE1648. This hitch extender is specially designed to work with Ford's 3" factory trailer hitch. This is the only…

I spoke with my contact at Tow Ready about the Tow Ready Combo Bar, part #80948. This is a 48 inch long bar that is used to fabricate 2 inch trailer hitch receivers. They told me this bar is used when they manufacture hitches with capacities up to…