Titan Chain Safety Chains and Cables - Safety Chains - TCTSCG30-730-04X1 Review Video

I am not aware of a bolt-on version of the Buyers Products Weld-On Safety Chain Retainer part #3375471000. However, if all you were wanting to do is mount your safety chains to the tongue of your trailer then you will just simply do so by running a…

The best length for the cable of a breakaway system like the Tow Ready Trailer Break Away Kit #50-85-313 that you referenced will be just a bit longer than the safety chains. The breakaway cable should be longer than the safety chains according to…

The best length for the cable of a breakaway system like the Tow Ready Trailer Break Away Kit #50-85-315 that you referenced will be slightly longer than the safety chains. The breakaway cable should be longer than the safety chains according to RVIA…

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

The Trailer Idler Hub Assembly for 3,500 Pound Axles - 5 on 5 #AKIHUB-550-35-K referenced in your question are compatible with 3,500 pound axles with #84 spindles like the Redline #R20384EZ. I have attached an image showing the dimensions of this…

The Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased #AKIHUB-550-35-K should fit just fine with your Big Tex trailer, however I do recommend double checking the bearings and seal to make sure it matches with what you currently…

The 27 inch overall length of the Long Safety Chain, #2118-605-04, includes the hook. I pulled the chain from our warehouse and found that the chain portion measures 25 inches. We do offer longer chains if you are interested. I have attached a link…

It is possible to mount the springs on top of the axle which is called "flipping the axle". To accomplish this we normally recommend an over-under conversion however there is not one with square u-bolts available for your square axle.…

I spoke to a technician about the tongue weight on the etrailer.com #CT-3002-Z, and it would be up to 15% of the 3,500 capacity. This would give you a maximum tongue weight capacity of 525 pounds. As to the length, it really shouldn't make too…

Yes, you can replace your weld-on coupler with a bolt-on. You'll just need to drill the holes. Then, if you wanted to go back to a weld-on later that would be fine too. Just to confirm you can check with the trailer's manufacturer that…

To install the Demco A-Frame Trailer Coupler #DM16680-52 that you referenced, you will want to use 3/8 inch, grade 5 bolts , approximately 1-1/2 inches long (depending on how you are installing the coupler). You will want to use 5 of these bolts per…

Glad you're enjoying our site! We try to have the best info/content on the products we sell. For a tire to install on the rims you currently have I would recommend going with the same size 175/80R13 that you have. For a radial tire a very good…