What is a #84 Spindle and How Do I Know I Have One On My Trailer?
Question:
Item # CE13515 What does #84 spindle mean? I am replacing the hub and bearings on my utility trailer. This item looks like it fits the bill. I have the old hub with me failed on the road and trailer is parked elsewhere and I can measure the hub where it fits on the axle and the existing bearings and nut. Just want to make sure Im getting the correct part. Thanks.
asked by: Stephen
Expert Reply:
The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it.
The CE Smith Trailer Idler Hub Assembly # CE13515 uses the following parts:
Inner bearing: L68149 (1.378" inner diameter)
Outer bearing: L44649 (1.063" inner diameter)
Grease Seal: 58846 (1.719" inner diameter and 2.565" outer diameter)
As long as this matches what you're currently using then you have a #84 spindle that this will fit on!
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Search Results: #84 spindle
- Search Results: spindle nut
- Search Results: marine bearing grease
- Search Results: d washer
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Video: Lionshead Trailer Wheel Center Cap Review
- Article: Most Popular Wheel Bearings
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13511 Review
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Search Results: 13515
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: buddy hubs
- Search Results: boat trailer lights
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: Bearing Inner Diameters that Come with Trailer Hub # CE13515
- Q&A: What is the Best Grease for Trailer Bearings
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Shop: Vehicle Lights
- Q&A: What is the Inner Diameter of Trailer Bearings L44649 and L68149
- Video: etrailer Hub And Drum Assembly Installation
on Trailer Hubs and Drums
