Titan Brake Actuator T4748800 Review Video

The length is 19 inches of the 7,500 lb Dexter DX7.5L A-60 Brake Actuator - Bolt On - Drum - 2" Ball #DX27FR.

The Dexter DX7.5L brake actuator part #DX27FR will fit on a 3 inch by 3 inch trailer tongue like what you have. Now it would be hard to say if it would bolt right up to existing holes that you have but either way you could drill new holes in the…

The Replacement Solenoid Valve #T4748800 was specifically designed to be used on your Titan Model 6 coupler so I can guarantee it will work for you. We have had several customers do exactly what you are looking to do without any issue.

When the Dexter shock part #DX76FR is fully retracted it measures 8-1/2 inches from bolt hole center to bolt hole center. When extended it is 12-1/8 inch from bolt hole to bolt hole. One of the holes of the shock is 1/2 inch in diameter and the other…

For your Dexter DX12.5 actuator, you will need to use a reverse lockout solenoid. For that we recommend the Replacement Solenoid Valve for Dexter Brake Actuators #T4748800. I have linked our install video below if you want to take a look.

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

Yes, the Dexter Brake Actuator part #T47457007K that you referenced is a replacement for your Titan Model 60 actuator.

I do have some good replacement options for you although you'd have to drill a few new holes for mounting as none will line up with what you have now as the model is discontinued and there are no direct replacements. I recommend the Dexter DX7.5…

For a Four Winns Boat Trailer with Titan Aero 6000 Surge Brake Actuator, I recommend replacement using the Titan Zinc-Plated, Leverlock Brake Actuator part #099-175-20 which is ready to go as is and will be a great fit. The reason I recommend…

The Replacement Shock Absorber Spring Kit #TK71-758-00 is the correct shock for your UFP Surge Brake Actuator. The picture you included does not specify if it is for a disc or drum brake set, so I have found both for you to choose from. Disc Brake…

A shock absorber's tongue like on the Titan Replacement Shock Absorber for Titan Model 60 Brake Actuators #T2336200 referenced in your question will not normally return on its own after bleeding the brakes. Typically you will have to manually…

The only way to turn a surge brake actuator "off" is to engage a lockout on the actuator. Some actuators have manual lockouts, others have electric lockouts, and some have no way to lock out the actuator. Typically, free-backing brakes are…