Customers compare 5-57 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Since you need 10 inch by 2-1/4 inch hydraulic brake assemblies that have a 4 bolt pattern that is 2-7/8 inches the drum brake kit part #AKUBRK-35-D would be what you'd need. The bolt pattern you mentioned is the standard 4 bolt pattern.
view full answer...Hubs will heat up when driving, but if it feels like they are getting too hot, then you will want to look at a few things on your hub. My guess is that the spindle nut is too tight and the added stress on the bearings is overheating the bearings…
view full answer...Yes, we do have replacement spindle nuts and washers. I have included links to all of the options we carry. We have 2 different D-washers. First, #5-23 is designed for 3.5K to 5.2K axles. And #5-57 is for 6K to 8K axles.
view full answer...For a d-washer to use on your spindle you'd want the part #5-57.
view full answer...As long as bearings on the hub you choose are compatible with the existing spindle on your axle, you can indeed change to hubs that have the desired wheel bolt pattern. The first step would be to confirm the dimensions of your spindles using an…
view full answer...That fluid has to be going somewhere! What you can do is have someone activate the manual override on the brake controller in the vehicle cab while checking for leaks. Make sure the reservoir is full though. If it is not leaking at a line or…
view full answer...From what I was able to determine, your CR 21352 grease seal is a Chicago Rawhide 21352 and should be a double lipped seal with a 2.125" ID and 3.376" OD. To replace a seal of that size you'll want to use the #GS-2125DL, which has the…
view full answer...The TruRyde Replacement D Tang Spindle Washer #5-101 that you referenced has a 1-inch inner diameter to fit on 1-inch diameter spindles. All such items that we offer share this same 1-inch inner diameter, such as parts #5-23 and #5-57. The points on…
view full answer...I reached out to Dexter and they confirmed that you have a 2,200 lb axle. This means the correct bearing kit you need is part #BK1-150.
view full answer...We have a few bearing kits that could potentially work for your utility trailer, but we first need to determine what you have on your trailer so that we can pick out the correct parts. What you would need to do is remove a current hub and get the…
view full answer...The bearing kit we offer that uses the L44649 bearings is part #BK1-150. This kit is designed for 3,500-lb axles and it includes the bearings, races, seal, cotter pin, and an EZ Lube spindle washer. This bearing kit is designed to fit spindles that…
view full answer...In order to determine which replacement axles you need, I will need a few measurements. I will need hub face to hub face measurement, spring center to center dimension, inner and outer wheel bearing reference number, and the axle capacity. Take a…
view full answer...