Replacing Damaged Axles and Spindles on a Yacht Club Trailer
Question:
Hi, I have a Yacht Club trailer for dual PWCs with a damaged spindle. They are welded to the axle so the axle must be replaced...do you carry any that are standard yacht club replacements or do you need all the measurements and try to match it? Thanks
asked by: Mark
Expert Reply:
In order to determine which replacement axles you need, I will need a few measurements. I will need hub face to hub face measurement, spring center to center dimension, inner and outer wheel bearing reference number, and the axle capacity. Take a look at the diagram I included.
Regarding replacement spindles, you will want to use a dial caliper to measure the dimensions of your spindle for me to recommend a new one.
The spindle measurements are labeled A through F, please view the diagram as a guide.
A is the spindle shaft diameter
B is where the grease seal sits
C is where the inner bearing sits
D is where the outer bearing sits
E is the thread diameter at the end of the spindle for the nut
F is the spindle shaft length
If you could let me know the year, model number and VIN of the trailer, we may be able to provide you with the correct information without needing the measurements.
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Search Results: spindle
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Video: Review of Universal Group Trailer Leaf Spring Suspension - Springs - SP-072275
- Shop: LED Trailer Fender Clearance Light - Submersible - 2 Diodes - Amber/Red - Driver or Passenger Side
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 3-Leaf Double-Eye Spring for 3,300-lb Trailer Axles - 18-5/16" Long
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Search Results: location
- Search Results: springs
- Video: Review of Curt Ball Mounts - Fixed Ball Mount - C45056
- Search Results: all
- Search Results: rearview camera
- Q&A: Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
- Search Results: locationaj1
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Video: Review of Dexter Trailer Brakes - Electric Drum Brakes - K23-478-479
- Shop: Mud Flaps
- Search Results: mud flap
- Q&A: Replacement E-Z Lube 4" Drop Spindle for 3,500LB Leaf Spring Trailer Axle
- Video: Review of Bulldog Winch Electric Winch - Hoist Winch - BDW64FR
- Video: Review of etrailer Trailer Fenders - Single Axle Jeep Style Aluminum Fender - HP96VR
- Video: Bulldog Winch Electric Winch - ATV - UTV Winch - BDW15001 Review
- Q&A: What is the Offset of a Trailer Wheel
- Q&A: How to Determine Wheel Offset of Trailer Wheels
- Q&A: Selecting New 5-Bolt Hubs to Replace Original 4-Bolt Hubs on 1970's Dexter 3500-lb Axles
- Q&A: Is 90 PSI Rating for 4.80-12 Size Tire Too High
- Shop: Trailer Wiring