etrailer.com Trailer Hitch Installation - 2014 Chrysler Town and Country Video

Yes, it will! The etrailer Hitch item #e98854 has a 4,000 lbs towing capacity and is confirmed to fit your 2014 Dodge Grand Caravan SE. This hitch is custom fit and bolts to your Dodge with included hardware. I have linked an installation video…

The etrailer hitch #e98854 that you referenced fits all models of the 2018 Dodge Grand Caravan which includes the GT models with stow away seats. I attached an install video for this for you to check out as well.

Looks like your 2014 Chrysler Town and Country has a towing capacity of 3,600 lbs which means you could tow your trailer that has a dry weight of 3,000 lbs as long as you don't load it with more than 600 lbs. If you were looking for a hitch…

Yes, you could use axle #20440I-EZ-60 for your trailer project! The width of your trailer is the same as the spring seat center to center measurement on the axle (48 inches). The hubs on this axle will accommodate up to 12 inch wheels with a 4 on 4…

Since you want to change your trailer hubs to the 5-on-4-1/2 bolt pattern I suggest you select a 60-inch axle kit that includes idler hubs, such as one of the two kits shown on the linked page. These two 2K-rated axle kits include 5-on-4-1/2 hubs,…

Your 2010 Chrysler Town and Country minivan can be equipped with either a 1-1/4-inch Class II or a 2-inch Class III trailer hitch. All options are shown on the link provided. I suggest the Class III hitch #13364 from Curt; this is the most popular…

Draw-Tite trailer hitch #75579 will fit all models of the 2014 Chrysler Town and Country. There should be no bumper fascia trimming required. The only trimming mentioned in the instructions, linked to the right, is possibly on a mudflap. I have also…

The U-Haul 5x8 Cargo Trailer has a suggested coupler height of 18". Therefore, you'll want to take this measurement and subtract this from the distance from the ground to the top inside edge of the receiver on the vehicle. The difference…

The most economical trailer wiring harness available that is confirmed to fit your 2012 Chrysler Town and Country is the Curt T-Connector #C56331. This custom harness will install by plugging directly into factory ports behind the vehicle's tail…