Review of Peterson Trailer Lights - License Plate Lights - M290 Video

The best location to install the Linxup GPS Tracking Device part #300-AT3-S is subjective. The box is weather proof so you don't need to worry about it getting wet or dirty. It will however need access to power so that is something you will need…

Most if not all trailer wiring harnesses/connectors use larger wires for the 12 volt and ground circuits compared to the other circuits (lights). The sockets themselves don't have an amperage rating so you will go by the draw of the things…

To protect the 12 volt accessory power supply circuit, we recommend using a 40 amp inline circuit breaker, part number 9510.

If you are installing a 7-way and brake controller you will want to use a circuit breaker in-line when connecting the Black wire from the 7-way to the battery and in-line from the brake controller to the battery. The Black wire will draw 12 volt…

To wire the 4 clearance lights #MCL0040ABB, license plate light #M298C, and tail lights #STL190RB to your 12' long 75" wide vintage trailer, I recommend starting the 4-Way Wishbone Trailer Wiring Harness with 42" Ground Wire #A40W42B…

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

Yes, trailer wiring harness #C56332 does have a fuse in a red holder near the large black converter box. If that fuse is fine, then use the vehicle owner's manual to find any fuses related to tow package wiring on the vehicle to check them. If…

Curt T-Connector Vehicle Wiring Harness #C56291 includes both a red 10-amp mini blade fuse for the red fuse holder on the harness and a pink 30-amp box fuse for the fuse box in the engine compartment. Both fuses are shown in the linked photo.…

The #RED44FR is the 331-EBRH-ACCV3, which is the 3rd version of the Redarc Tow Pro Elite controller that was originally only available in Australia; the #331-EBRH-ACCV2 is the 2nd version and has been phased out. They're really mostly the same…

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

No the LED Trailer Tail Light with Reflector #328-003-6019R does not need a gasket for installation. The light has a sealed, waterproof housing and lens which makes the light submersible. The light is rated up to 100,000 hours of operation. If you…

I looked up your 2016 Rpod 179 and the #328-003-6019R light looks a lot like what you have. I can't be sure without measuring your light but this one is 5-3/8 inches in total diameter. The mounting holes are also 4-1/8 inches apart on center.…