Customers compare LPL12CKM2B to these similar products
Products Featured in this Video
Speaker 1: Today we're taking a look at the Optronics LED license plate light kit with the bracket and the included grommet. This is a three quarter inch sealed waterproof LED license plate light. It is SAE and Department of Transportation compliant. It features a really nice polycarbonate lens and housing that's very strong and durable. This light contains a total of two LEDs. LEDs are… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Voyager WiSight 2.0 Wireless Backup Camera System #ASA24YR uses screws to lock the camera angle in place. If you loosen the outer two screws it should allow you to move the camera up. If it's still too tight you can also loosen the…
view full answer...The ball joint for the suction cup mount that fits the Voyager WiSight 2.0 Wireless Backup Camera System #ASA24YR has a 0.7875" diameter. Attached is a photo showing this as well as a review video for you to check out.
view full answer...We do have a selection of amber clearance lights, like the Peterson Clearance or Side Marker Light Kit #2250A, which you can filter through on the linked page. If you can send me a photo of your current lights I can see what we have that best…
view full answer...Most likely, the red wire on your new tail light is for the turn signal, the black wire is for the tail light and the white wire is for ground. I do recommend testing the wires on your trailer for function, but typically the yellow wire will be for…
view full answer...The Thinline LED Trailer Tail Light part #STL59RB is not designed to illuminate as separate turn signals. You would need two lights for that to work.
view full answer...The Optronics LED Trailer License Plate Light with Bracket #OPT97FR would normally be mounted to the surface of a trailer. The the only way to power this light using the Curt Auxiliary LED Indicator Lights #C53201 would be to splice into the running…
view full answer...If you look on the frame of your trailer there should be a plate with the trailer VIN number and the axle capacities of the trailer. You will want to pick leaf springs that are as close to the axle capacity as possible. You will want to also measure…
view full answer...Typically a 4 Flat plug will not have a lead that goes to a battery as the White wire is the Ground, The Yellow is Left Turn/Brake, Green in Right Turn/Brake, and Brown is Running Lights. If you were using this for a different application, you can…
view full answer...I have attached a photo that shows the correct way to wire a breakaway system. If the brakes are not applied when the pin is pulled, you will need to trace each of the wires back to their origin to make sure there are no breaks or frays. If you…
view full answer...Yes. Check Fuse #90 in your fuse block. It is a 25 Amp cartridge fuse for trailer tow battery charge located in the engine compartment. You can find the location in your owners manual if you need further location help. I've also attached a help…
view full answer...It sounds like the axles were attached with 2 inch U-bolts that are 1/2 inch diameter which are a standard size so it sounds like the axles are compatible with a standard U-bolt kit like the CE Smith U-Bolt Kit for Mounting 2" Square Trailer…
view full answer...The dimension you inquired about is shown on the linked diagram. The spindle-center to frame mounting point on the Timbren axle-less suspension system #A20RS545 is 2-5/8-inches. If you wish you can see various other dimensional drawings on the…
view full answer...