Optronics Trailer Lights - Tail Lights - RVSTLB60 Review Video

The only way will be to replace the entire assembly as the rear back plate is not available by itself. For that you'd need the part #RVSTLB61. The great news is that the price for this is very reasonable and you get an all new assembly.

I can help you out here as we do have both the driver side and passenger Low Profile LED RV Tail Light. The matching passenger side has 9 diodes though because it does not have bulbs to light up the license plate. The two matching lights are the…

While we do not carry a specific V-drag weld-on bar that protects your trailer from bottoming out, we do have an option that serves the same purpose. From the specs I have on your 2010 Forest River Cherokee Grey Wolf travel trailer, it measures 29.25…

I checked photos of the rear of your 2017 Forest River Vibe travel trailer since we do not have a way to look up the specific light part installed when it was made. It looks like you need red lens part #A32RB. This is a snap-on lens for the Optronics…

It sounds like you are looking for a replacement passenger side tail light for your 2016 Coleman Lantern 274bh trailer by Dutchmen. If that is the case, we have exactly what you are looking for! From my research, it looks like those trailers came…

The Curt Spectrum Trailer Brake Controller - 1 to 4 Axles - Proportional - Dash Mount #c51170 will flash blue on its control knob when the brakes are applied with no trailer or when it senses the trailer has been disconnected. If you look at the…

Your 2021 Chevrolet Silverado 2500HD High Country likely has the advanced towing package. This package adds an extra couple of steps. First you will need to determine if the Trailer Detection Alert is enabled. This information can be found in the…

If the 12-volt pin on your trailer connector isn't working, you've got a missing or blown fuse or the wiring connection at the fuse box under the hood wasn't finalized. You're looking for a 40 amp fuse, located in position #68 in the…

The closest bolt pattern we would offer to the 8 lug on 170mm bolt pattern you mentioned would be an 8 lug on 6-1/2 bolt pattern. 6-1/2 inches is 6.692 inches, which is close, but not exact. The Timbren Axle Less suspension system you mentioned, part…

The size of the nuts that fit the posts of the Trailer Wiring Junction Box #3375601101 is M5-.8 pitch. This does not come with extra nuts.

Yes, the Dexstar Vintage Steel Wheel #AM20395 should work well for you. This is a 15 inch rim with a 4 on 9.44 inch bolt pattern like what you have.

Thank you for the photo, and though we have tail lights that will work for you there is unfortunately no database with each part number for each year, make and model of trailer that would allow us to look up what you might have. Instead, you will…