Customers compare MCL97RPG to these similar products
Products Featured in this Video
Today we are going to show you Optronics sealed 3 light truck and trailer identification light bar, with LED light, part number MCL97RPG. This light features 3 lights that have 3 LEDs inside them. The lenses are red and the light draws a total of .058 amps at 12.8 volts.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…
view full answer...Since your dimensions match exactly to the Tandem Axle Teardrop Trailer Fender part #HP54VR this fender would work great despite your wheel size being a 15 inch and this saying it's for a 14 inch. The wheel size info we associate with our fenders…
view full answer...The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…
view full answer...I reached out to my contact at Optronics and they were able to give me some additional information on this light set. The LED Combination Trailer Tail Lights #TLL16RK have full copper wires that are 18 gauge wires.
view full answer...If you are going to back your trailer in the water while it is still connected to the tow vehicle, you will need it to be waterproof. Whether or not it is water proof depends on the trailer, the construction, how it is wired, and if the taillight…
view full answer...Actually the part #DL22457 that you referenced should work just fine for you. This jack has a lifting capacity of 1,000 lbs which would be more than enough for a setup that has a 4,000 lb boat. Most likely your tongue weight would be around 500 or…
view full answer...The difference between the letter D in your ST175/80D13 and the R in the tire size of the Wheel and Tire ST175/80R13 part #AM31985 that you referenced is the tire construction. D stands for bias-ply which is a less preferred tire construction,…
view full answer...The Apogee Adapt-X 500 folding utility trailer, like #AT74FR does not include a spare tire holder. You can certainly add one, but the problem lies in finding a spot to install a spare tire without interfering with the trailer's ability to fold.…
view full answer...The best option will be the Fulton Hi-Mount Spare Tire Carrier #FSTC1000301. This can be mounted to the front section of the bed on your Apogee Adapt-X 300 AT44FR, but may require drilling to get installed.
view full answer...To convert your tandem axle boat trailer to a electric over hydraulic braking system, I recommend the Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes item #HS481-8067. This kit includes the required breakaway kit and the…
view full answer...The HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness #HS381-9067 is designed to work with an aftermarket electric over hydraulic brake controller. This kit will require you to wire in the components using the wire…
view full answer...Part #PTW2997 works great for charging your breakaway battery when the trailer is not in use. This product is easy to hook up and fairly inexpensive compared to the price of a new battery. I strongly recommend this product. We do not carry any…
view full answer...