Recommended Spare Tire Carrier for Apogee Adapt-X 300 Trailer

Question

Question:

what spare tire mount would work with my apogee 300x trailer and where should I mount it?

asked by: Michael M

0

Expert Reply:

The best option will be the Fulton Hi-Mount Spare Tire Carrier # FSTC1000301. This can be mounted to the front section of the bed on your Apogee Adapt-X 300 AT44FR, but may require drilling to get installed.

expert reply by: Lazer S

0

Answer 1

The Apogee Adapt-X 500 folding utility trailer, like #AT74FR does not include a spare tire holder. You can certainly add one, but the problem lies in finding a spot to install a spare tire without interfering with the trailer's ability to…

view full answer...

Answer 2

The difference between the letter D in your ST175/80D13 and the R in the tire size of the Wheel and Tire ST175/80R13 part #AM31985 that you referenced is the tire construction. D stands for bias-ply which is a less preferred tire construction,…

view full answer...

Answer 3

For a recumbent trike the Detail K2 Mighty Multi Utility Trailer #K2MMT4X6 would do a great job. It would just be a matter of securing the trike to the trailer. We have the SportRack Cam Buckle Cinch Straps - 1" x 12' - 233 lbs - Qty…

view full answer...

Answer 4

I reached out to my contact at Detail K2 and they mentioned that the Detail K2 Mighty Multi Utility Trailer - 6' Long - 1,295 lbs #K2MMT4X6 you were looking at is rated for the posted speed limit on any highway in North America. With this being…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...

Answer 12

The wheels for your ST215/75R14 sized tire on your 2022 Coleman Lantern 17B are 14" X 5-1/2" wheels with a 5 on 4-1/2 bolt pattern. The Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C, part…

view full answer...