Review of Mount-n-Lock RV Bumper Safety Struts - MO34VR Video

Normally the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR install on outsides of trailer frame. I attached an install video for this for you to check out as well.

I talked to one of our install team members about the Mount-n-Lock ShakeStopper for 6" RV Bumpers - 2" Hitch Receiver - 400 lbs #MO64VR. The easiest option would be to replace the Coupling Bolts (shown below, threaded into Coupling…

While the Swagman Bumper Mount Racks, parts #S80600 and #S80605, do give you some mounting options, these are designed for lighter 30 lb bikes so the bars that hold the bikes up aren't really designed for heavier 60 lb e-bikes. Since this is…

It sounds like you have the Ventline Ventadome Roof Vent w/ 12V Fan #V2119-601-00. This Ventline roof vent has a powered lift arm assembly. The correct arm assembly replacement that you would need would be the Replacement Operator, Knob and Screw…

You could replace the Dometic air conditioner with Furrion Chill HE RV Air Conditioner System - Manual - 15,000 Btu - White #FR92PR, it has a built-in thermostat with the controls directly on the unit. You cannot use your current thermostate…

To replace just your rooftop condenser unit I recommend the Furrion Chill Replacement RV Air Conditioner #FR42PV. This unit is designed to work with ducted systems, like you currently have, and comes with wiring harness adapter that will make the…

For a low pressure automatic changeover regulator the best option is the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator #37207-31525. This uses the standard 1/4" FIF inlet x 3/8" FPT outlet, and to mount it I do…

The Automatic Changeover RV LP Gas Regulator #37207-30395 that you referenced is made by JR Products. It does not come with pigtail hoses for the tanks so for that you'd want the pigtails like the part #100833-24.

I called my contact at Curt and they said the engineer drawing for the RV Bumper #E-100 is 4-1/16 inches inside width and height so it may be a tight squeeze but should fit your bumper. This hitch has a 2-inch receiver opening and is rated for…

As long as your 2020 Sonic by Venture has a 4" bumper then this set up should work for you because the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR will fit bumpers 4" to 4-1/2" and the Curt RV Bumper 2"…

We have the locking cargo carrier for generators from Torklift with the part number #TLA7752 which does a great job securing generators tightly in travel as well as preventing theft. I attached a review video for this for you to check out as well.

The Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets - 4" to 4-1/2" #MO22FR and Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2" #MO34VR. Use #MO22FR for standard bumpers and use #MO34VR…