Review of Maxxair RV Vents and Fans - Enclosed Trailer Parts - MA10-04301k-v16 Video

For a replacement circuit board you can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. We have confirmed with MaxxAir that this is the correct for what you have.

The replacement circuit board for your MaxxFan 4201 Series is the Replacement Printed Circuit Board and Switch for MaxxFan 4301 Series Roof Vents #MA10-04301K-V16. The 4201 series circuit boards may look different compared to the upgraded circuit…

It sounds like your MaxxFan may need a new circuit board. Typically, when customers had similar issues they were able to replace the circuit board and their fan return back to normal operation. You can use Replacement Printed Circuit Board…

Yes. The Replacement Printed Circuit Board and Switch for MaxxFan Roof Vents #MA10-04301k-v16 is the printed circuit board you need.

Thanks for the picture! I have an option but The Replacement Rocker Switch #BL0108-00 is only capable of on-off and will not work for checking the capacity of your tanks. You will need the Mini-Momentary Switch #37213725 which will fit the same…

When removing a switch like the part #BL0108-00 from a Ventline roof vent there is a tab on the top and bottom of the switch that needs to be pressed for the switch to be able to be pushed out. You'd have to access it from above if you can't…

Based on the part number of your motor the correct circuit board would be the part #MA10A21275K.

For your MaxxFan RV roof vent part #MA00-05100K the correct replacement circuit board is the #MA10A21276K.

For your MaxxFan that is a 4301 Series the correct circuit board is the part #MA10-04301K-V16.

If the touch pad is showing "Retract Time out Return Levelers for service" all you need to do is hit, enter and retract at the same time. That will clear that code. I confirmed this with our contacts at Lippert.

You will need a different fan like the MaxxFan Plus Roof Vent #MA00-04500K to have a remote controlled fan. The MaxxAir MaxxFan Mini Roof Vent #MA00-04401M is not capable of being used with a remote. The circuit board does not allow for this type of…

Thanks for reaching out! Since you have the 4951KS model MaxxFan roof vent you'll need the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. The circuit board might look slightly different as far as the pieces…