bing tracking image
Q & A Icon

How to Clear Retract Time Out Return Levelers Error on LCI Level Up System  

Question:

I had a retract timeout error and I did what you said to clear it then after I did that I now have a right up error message and the right front and back light is illuminated red. How do I clear that?

0

Expert Reply:

If the touch pad is showing "Retract Time out Return Levelers for service" all you need to do is hit, enter and retract at the same time. That will clear that code. I confirmed this with our contacts at Lippert.

expert reply by:
0
Jameson C

Tomg

4/29/2024

Thank you for having critical info like this readily available. Just returned from a short first of season trip (3 hours), all OK. Repositioned rv and this error showed out of nowhere. Working again as advertised Thank you

Etrailer Expert

Jameson C.

4/29/2024

@Tomg Glad we could help!

Artie P.

4/13/2024

I had removed my batteries during the winter for the 2nd year in a row. Reinstalled a month ago and all seemed fine. today when I turned on the ignition, I heard a beeping that eventually stopped after 10 seconds or so. I found out that the leveling system was producing that code and the levelers were retracted. Tomorrow I'll go back to the storage yard and try the reset trick you mentioned. This would be much better than driving 45 miles to the dealer and leaving it until they have time to look at it. Thank you for the advise

Etrailer Expert

Jameson C.

4/15/2024

@ArtieP Hope it works!

Artie P.

4/15/2024

Press two buttons simultaneously and the error disappeared and the jacks go up and down. Saved me a trip to the dealer Thank you
Etrailer Expert

Jameson C.

4/16/2024

@ArtieP Glad we could help!

Reba

4/13/2024

so glad you had this information online. saved us a service call. Thank you again

Etrailer Expert

Jameson C.

4/15/2024

@Reba Glad we could help!

Retina

3/2/2024

Thank you for this information

Christy

4/19/2020

Getting a jack timeout error

Etrailer Expert

Chris R.

4/21/2020

Is it the same error described above? If so, did you try following the procedure Jameson described? If it didn't clear/resolve the error, make sure your battery source is still fully charged and in good condition. A weak battery has also been known to trigger this error message.

Alex C.

3/13/2021

@ChrisR i have full battery with that code "retract timeout " but holding power and retrac does nothing
Etrailer Expert

Jon G.

3/13/2021

@AlexC Are you able to manually retract your jack(s)? If the manual operation works but not when you use the power then there may be a plug disconnected or possibly some damaged wiring. I'd start there and then I can help you troubleshoot further if that doesn't fix it.
See All (5) Replies to Christy ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>