Replacement Circuit Board for MaxxAir Fan 4951KSC

Question

Question:

2019 momentum 381 5th wheel toyhauler Max air fan model 4951KSC I need a circuit board for that none of your circuit board numbers match what I have or look the same Number on circuitboard 10A04751KZ second number 2018.11 If you could let me know which board I need, that would be great. Thank you.

asked by: Albert Z

0

Expert Reply:

For a replacement circuit board you can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents # MA10A04751KS. We have confirmed with MaxxAir that this is the correct for what you have.

expert reply by: Jameson C

0

Answer 1

I was able to confirm with MaxxAir that the Replacement Control Plate for MaxxFan Roof Vent part #MA05-20226K is correct for a MaxxAir Vent Fan Model 4951KSC. The key pad holes are only used on certain models so if yours does not have this they…

view full answer...

Answer 2

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 3

I got you covered, the correct replacement circuit board for your MaxxFan 4751KS you'll want the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS.

view full answer...

Answer 4

This definitely sounds like the circuit board, so you'll want to use the Replacement Printed Circuit Board #MA10A04751KS which is designed to work with models 4751KS, 4761KS, and 4951KS. I know some other customers have been apprehensive about…

view full answer...

Answer 5

Thanks for reaching out! Since you have the 4951KS model MaxxFan roof vent you'll need the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. The circuit board might look slightly different as far as the pieces…

view full answer...

Answer 6

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 7

Sounds like your roof vent lid isn't closing all the way when you ask it to which is why the fan isn't shutting off and also explains the clicking of the operator as it's trying to close it. In the past we've seen similar issues to…

view full answer...

Answer 8

The correct replacement for your MaxxAir Circuit Board 10-04751ks is the following part: - Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS As for the sensor wires, so long other wires are not damaged, I don't…

view full answer...

Answer 9

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 10

It sounds like your MaxxFan may need a new circuit board. Typically, when customers had similar issues they were able to replace the circuit board and their fan return back to normal operation. You can use Replacement Printed Circuit Board…

view full answer...

Answer 11

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Circuit Board for MaxxAir Fan 4951KSC

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching