Review of MORryde Trailer Leaf Spring Suspension - Tandem Axle Shackle and Wet Bolt Kit - MR98ZR Video

Hey Beatrice, To find the right fit for your trailer's suspension you'll need to take a quick measurement of your current shackle straps. You'll need to measure from the center of one bolt hole to the center of the other bolt hole. The…

Hey Dave, the MORryde upgraded shackle kit part #MR76ZR that you referenced is compatible with your 2020 Grand Design 2670MK and the Lippert Road Armor equalizers.

You can definitely use the MORryde suspension bolts if that's what you're wanting to use. The correct kit depends on what your trailer is currently equipped with and how long your shackle straps are (see attached photo of where to measure).…

The MORryde Shackle Upgrade Kit for Tandem Axle Trailers w/ 2-1/4" Shackles & Correct Track #MR58ZR you were looking at may work on your 2018 Highland Ridge Travel Trailer 322RL with Lippert 5200LB axles and the correct track alignment/lift…

You will measure the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR76ZR from the center of each hole on the shackle strap.

The 4-Leaf Double-Eye Spring part #e44SR is what I recommend using to replace your Dexter Leaf Spring 072-078-00. It's the same length but a slightly higher capacity, 4,400 lbs vs. 5,000 lbs which is not much so it won't really affect the…

The Lippert #LC1565391 Center Point air suspension is compatible with trailers that have axles up to 8K in capacity with 1-3/4 inch wide leaf springs and standard equalizer hangers that measure at least 2-1/2 Inches in height from the center of the…

The Lippert Road Armor part #LC696740 that you referenced is most likely the correct kit you'd need but you'd want to measure the distance between the holes of your current equalizers. If they are 6 inches than this kit would fit. This is a…

In order to confirm fit of the Road Armor Shock Absorbing Equalizer Kit part #LC696740 you simply need to measure the length of your existing equalizers from eye to eye on center. If they are 6" on center or close then the Road Armor Shock…

You are correct that in the Blue Ox SwayPro Owner's Manual they do recommend use molybdenum grease on both the hitch ball and the spring bars. The LubriMatic Moly EP Grease #LM54FR in a grease gun, such as #L30480, will work well. You could use…

Nope, heavy-duty shackle straps are either 2-1/4" or 3-1/8", so the closest heavy-duty shackle strap to 2-3/4" would be the the 3-1/8" long, 1/2" thick Dexter Heavy-Duty Shackle Link #DX55FR. This option will still work for…

For a set of 3,000 lb leaf springs that would fit your trailer you would want the part #e46SR. These are 25-1/4 inches from eye center to center which should work well as a replacement for your 26 inch long ones. Springs tend to flatten out over time…