Review of MORryde RV and Camper Steps - Towable Camper - MR42UR Video

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

The MORryde StepAbove RV Steps #MR85RR weighs about 70 lbs. As far as the flip step, I assume you are referring to the MORryde Flip Tread RV Steps #MR42UR which weighs about 45 lbs. Both of these steps will fit your 28" wide door. Personally I…

Thank you for all of the info you gave. Based on that you'd want the trailer hub and drum part #AKHD-545-35-K that you referenced and then for brake assemblies to match you'd want the #AKEBRK-35-SA which is a self adjusting set for both sides…

The steps are approximately 19.415" in width for the MORryde Flip Tread RV Steps #MR42UR. To get wider steps you would need to size up in mounting width to something like the #MR28RR, but would need to have enough room for the steps to properly…

It is possible to mount the springs on top of the axle which is called "flipping the axle". To accomplish this we normally recommend an over-under conversion however there is not one with square u-bolts available for your square axle.…

According to MORryde, you need 5-1/2 inches of clearance from inside the door threshold to fold up the steps you asked about, which are the following part number: - MORryde Flip Tread RV Steps for 23-3/4" to 28-1/4" Wide Doorways - 4 Steps…

The Handrail for Second Generation 4-Step MORryde Steps #MR73AR is designed to be used with the StepAbove steps. Unfortunately this rail will not work for your MORryde Flip Tread RV Steps #MR42UR. That being said, the best solution is to add a…

The hinge plate of the MORryde Flip Tread RV Steps #MR42UR is 4-1/4" in depth. If you have an obstruction such as an interior step that is protruding into the door opening, you'll need to measure 4.5" from inside of the door flange,…

The SolidStep Manual Fold-Down Steps part #LC791574 will work with the SolidStep Lift Assist Kit for 26" to 29" Wide RV Door Frames part #LC733937 which will help with lifting and lowing the steps.

Yes, the SolidStep Manual Fold-Down Steps for doorways 25" to 28-7/8" #LC791574 can be installed on a door that has a shock absorber. But that does not mean it is going to work every time, it is really going to depend on how wide your…

If you have limited clearance inside the door our best option for fold down steps would be the MORryde Flip Tread RV Steps which require the least amount of clearance inside the trailer while folded up, you need 5-1/2 inches of clearance from inside…

When picking out an slide out awning the way to do it is with the outside to outside flange dimension of the slide out like what you listed. The part #LCV000163288 that you referenced is the correct size for your flange dimension of 86-1/4 inches and…