What Is The Weight Of The MORryde StepAbove And Flip Tread RV Steps?

Question

Question:

How much do the 4 step Morryde step above with strut assist weigh vs the flip step? Door width is 28 inches.

asked by: Keri

0

Expert Reply:

The MORryde StepAbove RV Steps # MR85RR weighs about 70 lbs. As far as the flip step, I assume you are referring to the MORryde Flip Tread RV Steps # MR42UR which weighs about 45 lbs. Both of these steps will fit your 28" wide door. Personally I like the MORryde StepAbove RV Steps just because of how stable they are. There is no movement or bouncing when you use the steps like a lot of other RV steps. They are a bit heavier than others but they are really not difficult to open and close, especially with the strut assist.

expert reply by: Jesse M

0

Answer 1

It sounds like what you are lookin for is actually the replacement heavy duty shackle and bolt kit part #018-026-05 and the replacement shackle part #018-024-01. These are super thick at 1/2 inch and the correct length from bolt hole to bolt hole at…

view full answer...

Answer 2

The difference is between just the MORryde Locking RV Storage Box #MR43RR and when you add the brackets at their widest setting. Just the box measures 25-3/4" but when you add the mounting brackets is when you'll see that 27-3/4" width…

view full answer...

Answer 3

According to MORryde, you need 5-1/2 inches of clearance from inside the door threshold to fold up the steps you asked about, which are the following part number: - MORryde Flip Tread RV Steps for 23-3/4" to 28-1/4" Wide Doorways - 4 Steps…

view full answer...

Answer 4

Absolutely, the Dexter leaf spring part 072-098-00 is a double eye spring, designed for 7,000 lb axles, with a 25-1/4" eye to eye measurement. The closest leaf spring we have to that is the Double-Eye Spring part #SP-198275 which is a double eye…

view full answer...

Answer 5

I would agree that a round handle for RV steps would be easier to grab and would feel more natural than a square shape. A better option for you might be the Lend A Hand Handle part #AM-533 which does have a round handle shape and has a pad for…

view full answer...

Answer 6

It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 #LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again. Zero Point Calibration The…

view full answer...

Answer 7

The MORryde StepAbove RV Steps #MR85RR weighs about 70 lbs. As far as the flip step, I assume you are referring to the MORryde Flip Tread RV Steps #MR42UR which weighs about 45 lbs. Both of these steps will fit your 28" wide door. Personally I…

view full answer...

Answer 8

The steps are approximately 19.415" in width for the MORryde Flip Tread RV Steps #MR42UR. To get wider steps you would need to size up in mounting width to something like the #MR28RR, but would need to have enough room for the steps to properly…

view full answer...

Answer 9

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

What Is The Weight Of The MORryde StepAbove And Flip Tread RV Steps?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching