Review of MORryde RV Cargo Slides - Portable Refrigerators - MR69UR Video

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

Thank you for all of the info you gave. Based on that you'd want the trailer hub and drum part #AKHD-545-35-K that you referenced and then for brake assemblies to match you'd want the #AKEBRK-35-SA which is a self adjusting set for both sides…

It is possible to mount the springs on top of the axle which is called "flipping the axle". To accomplish this we normally recommend an over-under conversion however there is not one with square u-bolts available for your square axle.…

The batteries of the sensors of the TST TPMS for RVs #TST-507-FT-6-C that you referenced will last between 12 to 18 months.

Yes, the batteries on the TST TPMS for RVs - Color Display - Signal Booster - 4 Flow Through Tire Sensors Item #TST-507-FT-4-C can be replaced with a CR1632 battery. You do not need to be moving for the sensors to be working, but the flow through…

The interior dimensions of the MORryde Refrigerator Tray #MR69UR measure 21-1/8" long x 37-9/16" wide x 2-1/2" tall. The great thing about this tray is that it comes with ball-bearing slides that make extending and retracting a…

I don't know the wiring pinout for the RVS monitor and camera systems but I can say that the connectors that come with the Rear View Safety Backup Camera System #RVS-770718 are only designed to fit one way so you can't really mess up where…

I spoke with the manufacturer, MORryde, about the dimensions of the MORryde Refrigerator Tray #MR59RR and their tech stated the distance from the ground to the bottom of the tray is 1.61". I can't exactly tell from your photos what your lip…

We do have a tray that'll fit your Dometic CFX3 95DZ, but the MORryde #MR69UR has an internal measurement of 35-1/2" where you fridge say its just over that at 35.52". That's way too close for me to be able to confirm it's going…

Yes. The M421KR is a Petersen part and the Optronics equivalent is the Sealed, 6-1/2 inch Oval Trailer Stop, Turn and Tail Light, 3-Function, #ST70RB, that you have referenced. For a complete set up, you will need Rubber Grommet #A70GB, and Straight…

There should be 2 inches minimum between the tires on a dual axle trailer. This will allow the suspension components room to work properly but a little more room is ideal. For instance the Ultra-Fab Chock and Lock Wheel Stabilizers for Tandem-Axle…

If you are changing from a 15 inch to a 16 inch tire and wheel you will add more height to the trailer. With the size tire you currently have on your trailer the diameter is approximately 28.87 inches tall. To go with a tire like part #AM35010 which…