Review of Kodiak Trailer Hubs and Drums - Hub with Integrated Rotor - KRH1378D Video

Customers compare KRH1378D to these similar products

Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Raw Finish - 1/2" Bolts - 7,000 lbs

(8)

$199.86

DeeMaxx Trailer Idler Hub for 7,000-lb Axles - 8 on 6-1/2 - Galvanized

(3)

$62.36

Kodiak 13" Hub and Rotor - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 7,000 lbs to 8,000 lbs

(9)

$238.18

Trailer Idler Hub Assembly for 7,000-lb Axles - 8 on 6-1/2 - Pre-Greased

(16)

$74.37

Dexter Trailer Idler Hub Assembly - 5,200-lb, 6,000-lb and 7,000-lb Axles - 12" - 8 on 6-1/2

(16)

$107.81

Dexter 12-1/4" Hub-and-Rotor Assembly - Grease - 8 on 6-1/2 - E-Coat - 1/2" Bolts - 7K

(1)

$308.89

Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 9/16" Bolts - 7,000 lbs to 8,000 lbs

(17)

$282.15

Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased

(64)

$119.22

DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs

(5)

$110.54

Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel

(12)

$233.17

Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 5/8" Bolts - 8,000 lbs

(16)

$260.04

Dexter Trailer Idler Hub Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Galvanized

(3)

$186.76

Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath

(9)

$214.02

Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2

(12)

$188.44

Dexter Trailer Hub and Drum Assembly for 8,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Oil Bath

(17)

$524.00

Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath

$214.62

Dexter Trailer Hub - Nev-R-Lube - 8 on 6-1/2 - E-Coat - 9/16" Bolts - 8,000 lbs

(10)

$366.74

Products Featured in this Video

Kodiak Trailer Hubs and Drums - Hub with Integrated Rotor - KRH1378D Review

Today we're going to take a look at the Kodiak 13" diameter Dacromet hub and rotor for a 7,000 pound axle. It has an 8 on 6-1/2" bolt pattern with half-inch diameter studs. Now this is a nice single piece hub and rotor assembly. Makes installation a snap, whether you're retrofitting or switching from drum brakes. The one-piece machine process will minimize runout and warping. So it's a balanced… see more >

Info for this part was:

Installed by:

Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.