Fulton Spare Tire Carrier - Frame Mount - FETCSTL0701 Review Video

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

I really like the part #FETCSTL0701 for your PWC trailer since it fits well, fits the standard bolt patterns and unlike others comes with a lock. This would be what I recommend.

The Fulton Economy Spare Tire Carrier with Wheel Nut Lock #FETCSTL0701 would work just fine on a section of angle iron that is 3 inches by 2 inches. The frame does not have to completely fill out the U-bolt to allow the carrier to install. I attached…

The Kenda trailer tire part #AM10130 that you referenced can fit all standard 12-inch trailer wheel sizes so it would work well on the 12-inch wheel you have on your Harbor Freight trailer.

The fender part #F008559 that you referenced can be used but you would need to drill matching holes to fit your trailer. The fender is plastic though so drilling will be fairly easy.

The experiences we've had with Harbor Freight trailers is that they use standard 5 bolt patterns common on other trailers. The most common being 5 on 4-1/2 inches like what the part #AKIHUB-545-2-1K which fits the common 2,000 lb axle spindle.

The Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel #AM3H290 can definitely fit a Harbor Freight trailer as these aren't trailer-specific, but there are a few things you need to check to make sure that it's a fit. The wheel is a 4…

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

It sounds like you have 5.30-12 tires on a 5 on 4-1/2 bolt pattern wheel on the Harbor Freight Haul-master. They are more than likely bias trailer tires as well. I recommend to use the Taskmaster 5.30R12 Bias Trailer Tire w/ 12" Silver Mod Wheel…

The tire and wheel combinations that we have available, such as the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12 Inch Wheel #AM31202, are mounted so that the high heavy spot on the tire is aligned with the low light spot on the wheel. While this…

The closest radial tire size I would have to replace the 4.80-12 bias tire size is the Kenda Karrier S-Trail ST145R12 Radial Trailer Tire #AM10130. The 4.80-12 bias tire is 20.7 inches tall and 4.9 inches wide. The 145R12 radial tire is 21.3 inches…

The internal dimension of the closed end of the large u-bolt for the Fulton Economy Spare Tire Carrier, #FETCHL0700, is 3 inches. You will want to mount the spare tire where the u-bolt will have the most contact with the trailer for a secure mount.…