Spare Wheel Carrier for PWC Trailer

Question

Question:

Which spare tire carrier is best for this 1999 Karavan jet ski trailer? See photos attached. Thanks.

asked by: Bill

0

Expert Reply:

I really like the part # FETCSTL0701 for your PWC trailer since it fits well, fits the standard bolt patterns and unlike others comes with a lock. This would be what I recommend.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Sorry to hear about your troubles. I will be happy to help you find some replacement wheels and tires for your Yacht Club Jet Ski Trailer that are more reliable. I recommend the Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel…

view full answer...

Answer 2

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this…

view full answer...

Answer 3

For your Zieman Boat trailer I recommend Fulton Hi-Mount Spare Tire Carrier - Fits 4-, 5-, and 6-Lug Wheels Item #FHDSTC0101. This carrier is very solidly built and gets the tire up away from the ground and out away from the boat. Fits frames…

view full answer...

Answer 4

We actually have had customers make the swap from rubber valve stems to metal valve stems so they can use the TST TPMS for RVs - Color Display - Signal Booster - 4 Flow Through Tire Sensors #TST-507-FT-4-C. I added the cut out of that review for…

view full answer...

Answer 5

I was able to confirm your wheels are 13 inches on your Zieman J1-B trailer. Because I don't know the tires currently on your trailer, I can only make recommendations for your spare based on best options for the two bolt patterns. If you have a 5…

view full answer...

Answer 6

If the part #TA26RR and what you sent in a picture of aren't the same they are very close as they both have the same tire size like you mentioned and they both have silver mod style rims. The valve stem covers are about the only thing see that…

view full answer...

Answer 7

Loadstar ST185/80D13 Bias Trailer Tire #AM3S331 is a bias ply construction whereas the 185/80R13 you have is a radial tire construction. The difference is how the plies run inside the tire. You would want to keep the construction type the same on the…

view full answer...

Answer 8

The 5 on 4-1/2 bolt pattern of a hub or wheel such as #AM20365 means that there are 5 lugs and, if you drew a circle that passed through the center of each lug the diameter would be 4-1/2 inches. I have included some links and a picture that will…

view full answer...

Answer 9

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

view full answer...

Answer 10

The standard replacement drive-in wheel stud for a 3,500 lb hub/drum like what you have on your Lippert 3,500 axle is the part #7-122 which is the correct thread size and length.

view full answer...

Answer 11

There is a spare tire carrier that will work for you, the CE Smith Offset Spare Tire Carrier #CE27310G. This carrier fits trailer frames that are up to 3-1/2" wide x 4" tall and holds 4 and 5 lug trailer wheels (4 on 4" as well as 5 on…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Spare Wheel Carrier for PWC Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching