Can Fulton Fender F008559 be Used on Harbor Freight Trailer

Question

Question:

I HAVE A 48 X 96 HARBOR FREIGHT TRAILER WITH 12 INCH TIRES, THE PRESENT FENDERS HAVE TWO BOLTS ON TOP TO MOUNT, DO I NEED TO MAKE TWO HOLES MYSELF, OR DO YOU HAVE ANOTHER FENDER IN WHICH I CAN USE. THANK YOU ....

asked by: ALESSANDRO P

0

Expert Reply:

The fender part # F008559 that you referenced can be used but you would need to drill matching holes to fit your trailer. The fender is plastic though so drilling will be fairly easy.

expert reply by: Jameson C

0

Answer 1

The experiences we've had with Harbor Freight trailers is that they use standard 5 bolt patterns common on other trailers. The most common being 5 on 4-1/2 inches like what the part #AKIHUB-545-2-1K which fits the common 2,000 lb axle spindle.

view full answer...

Answer 2

The Kenda trailer tire part #AM10130 that you referenced can fit all standard 12-inch trailer wheel sizes so it would work well on the 12-inch wheel you have on your Harbor Freight trailer.

view full answer...

Answer 3

It sounds like you have 5.30-12 tires on a 5 on 4-1/2 bolt pattern wheel on the Harbor Freight Haul-master. They are more than likely bias trailer tires as well. I recommend to use the Taskmaster 5.30R12 Bias Trailer Tire w/ 12" Silver Mod Wheel…

view full answer...

Answer 4

The Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel #AM3H290 can definitely fit a Harbor Freight trailer as these aren't trailer-specific, but there are a few things you need to check to make sure that it's a fit. The wheel is a 4…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Answer 12

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Can Fulton Fender F008559 be Used on Harbor Freight Trailer

Product Page this Question was Asked From

Continue Researching