Inner Dimension of the U-bolt for the Fulton Economy Spare Tire Carrier

Question

Question:

What is the inside dimension of the closed end of the large U-bolt? I want to check where it will fit on my trailer.

asked by: Don

0

Expert Reply:

The internal dimension of the closed end of the large u-bolt for the Fulton Economy Spare Tire Carrier, # FETCHL0700, is 3 inches. You will want to mount the spare tire where the u-bolt will have the most contact with the trailer for a secure mount.

Check out the pictures I attached showing the measurement I took and to give you an idea on how it would install on your trailer.

expert reply by: John H

0

click to enlarge

Answer 1

The Viair EVC Battery Powered Tire Inflator #VA88JR weighs only about 2 lbs. The compressor itself (not including the hose) is 6-1/4" tall x 2-3/4" wide x 1-7/8" deep. I have attached a dimensional drawing below for your reference.…

view full answer...

Answer 2

For your application you need the Pre-Greased Easy Grease Trailer Hub and Drum Assembly #AKHD-655-35-EZ-K. This matches all of the specs you mentioned and while it's only rated for 3.5K axles, it will still work for your Lippert 4.4K axle since…

view full answer...

Answer 3

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned you…

view full answer...

Answer 4

The Seal POS1501925TB is for oil and it has an inner diameter of 1.5" and an outer diameter of 1.987". We don't have an oil seal in this size but we do have a grease seal, the Grease Seal part #10-9 which measures 1.500" inner…

view full answer...

Answer 5

The Loadstar trailer tires are made in both China and Taiwan. You will want to check the inside of the tire and if there is wear also on the inside it will be from low tire pressure. Always make sure to inflate trailer tires to the maximum psi rating…

view full answer...

Answer 6

Actually when you use the Fulton Economy Spare Tire Carrier #FETCLB0201 that you referenced you do not use nuts to secure the U-bolt. Each of the brackets are threaded and basically become the nuts that hold the tire to the U-bolt. You will just need…

view full answer...

Answer 7

I have another option for you, but we do not offer a J bolt spare tire carrier for a trailer at this time. Instead I recommend taking a look at the CE Smith Spare Tire Carrier - Locking - Steel - 4-Lug and 5-Lug Wheels - 8-3/4" #CE27202 which…

view full answer...

Inner Dimension of the U-bolt for the Fulton Economy Spare Tire Carrier

Product Page this Question was Asked From

Continue Researching