Erickson Tie Down Straps - Trailer - EM58518 Review Video

The centerline on the #BR27FR is going to be from the center of the hitch pin hole. If you draw a line straight out and measure the distance to the bottom of the hook that is 1". I have attached a diagram below for your reference.

I was able to verify that the weight capacity for the Aluminum Car Hauler Ramp Set #288-07503 that you referenced is indeed 6,000 pounds (not kilograms) for the pair and 3,000 pounds per panel. The recommended maximum height of 16 inches is simply…

Dexter Nev-R-Lube hubs such as the part #8-388-80UC3 are designed to fit Dexter Nev-R-Lube Axles. These hubs use a special cartridge style bearing that is only compatible with the spindles on a Nev-R-Lube Axle. With this in mind you would not be able…

Yes, you could switch to electric over hydraulic brakes and retain the air over hydraulic braking system. What you would have to do is have the main lines that come out of each actuator go to a hydraulic T fitting, obtained locally, that has a valve,…

We have the ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks #317-18900 which is designed to fit wheels that are up to 33 inch in diameter and 12-1/2 inches in width. This would work perfectly for you as the ones you referenced are not going…

I will start by saying the ARK Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU will fit frames that are 2" to 6" tall. The bolt hole measurements vary and I included a diagram with everything listed, but the overall dimensions of…

The Transcom part 21334TB is the same as our part #RG06-090 which is a double lip grease seal that has an inner diameter of 2.125" and a outer diameter of 3.376. It is designed to be used with 5,200, 6,000 and 7,000 lb axles. I would not be able…

I have a recommendation for you, however, the Erickson Wheel Nets #77314 will not fit on a 30 x 3-1/2" tire. I recommend using the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM09160. These will fit on your E-Tracks and…

The Erickson Adjustable Wheel Net with E-Track Fittings part #77314 will mostly likely work on a 30" diameter tire just fine however, I cannot confirm this as the manufacturer lists the max limit at 29" diameter. If you can provide me with…

The Erickson Adjustable Wheel Net with E-track Fittings #77314 are adjustable for use with tires up to 29", so they're going to be just a bit too small for your widest tires. The other thing with these wheel nets is that they are only for…

The Replacement Shock Absorber Spring Kit #TK71-758-00 is the correct shock for your UFP Surge Brake Actuator. The picture you included does not specify if it is for a disc or drum brake set, so I have found both for you to choose from. Disc Brake…

Yes we do have the inner member available for the Dexter DX 7.5L A-60 #DX89FR that you mentioned with the #DX99FR.