Recommended Wheel Tie Downs for 30" Tires

Question

Question:

Can the Erickson Wheel Nets be made to fit a 30 x 3 1/2inch tire on a model T?

asked by: Scott C

0

Expert Reply:

I have a recommendation for you, however, the Erickson Wheel Nets # 77314 will not fit on a 30 x 3-1/2" tire. I recommend using the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM09160. These will fit on your E-Tracks and can fit around your 30" tires.

I also recommend Erickson Axle Straps with D-Rings # 08504-05 for extra support. These straps loop around the axle and then secures to the bed of your trailer.

I attached review videos of the Erickson Tie Down Kit and Axle Straps you may want to check out.

expert reply by: Sarah H

0

Answer 1

The Erickson Adjustable Wheel Net with E-Track Fittings part #77314 will mostly likely work on a 30" diameter tire just fine however, I cannot confirm this as the manufacturer lists the max limit at 29" diameter. If you can provide me with…

view full answer...

Answer 2

The Erickson Adjustable Wheel Net with E-track Fittings #77314 are adjustable for use with tires up to 29", so they're going to be just a bit too small for your widest tires. The other thing with these wheel nets is that they are only for…

view full answer...

Answer 3

We have the ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks #317-18900 which is designed to fit wheels that are up to 33 inch in diameter and 12-1/2 inches in width. This would work perfectly for you as the ones you referenced are not going…

view full answer...

Answer 4

We typically recommend that any beds in the 6-1/2' to 6-3/4' range used a sliding hitch and bed shorter than that used a fixed hitch with a rotating pin box to enable enough clearance to make a full 90 degree turn. Since you have a 2022 Ram…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...