Review of Dexter Brake Actuator - Replacement Master Cylinder with Solenoid - DX44FR Video

The Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes #DX44FR can be used to replace the A-60 master cylinder and is designed to fit on a variety of Dexter/UFP brake actuators.

The Replacement Shock Absorber Spring Kit #TK71-758-00 is the correct shock for your UFP Surge Brake Actuator. The picture you included does not specify if it is for a disc or drum brake set, so I have found both for you to choose from. Disc Brake…

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

Your old unit may have been self grounding if it only had the blue wire for the reverse light circuit, but the Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes #DX44FR does have an independent ground wire that will need…

The Replacement Inner Member for Dexter DX7.5L Actuator part #DX99FR is designed for UFP Model A-60 Actuators. I can't look up what actuator any one particular trailer uses but if you can get me the the model number of the existing actuator found…

The Dexter Actuator Inner Member part #DX99FR is designed as a replacement center section for the Dexter DX7.5L A-60 part #DX56FR which was designed to fit a 3 inch wide by 5 inch tall straight trailer tongue. If you are looking for a coupler…

The Solenoid Valve Replacement Kit for Titan/UFP Brake Actuators with Reverse Lockouts #TK71-755-00 only has a single wire, not for ground, and the issue may be that you do not have the correct replacement solenoid valve. I say that because you…

For the UFP A-60 we have the replacement shock part #TK71-758-00 and then for a replacement master cylinder we have the part #DX44FR. If you need something else let me know and I'll see if we can get what you'd need.

When It comes to replacing your A-60, I recommend The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2 inch Ball - Zinc - 7.5K #DX89FR. It is a bolt-on model, that has a weight capacity of 7,500 pounds. It has the electric…

For replacement master cylinders for your UFP A-84 you would need the part #DX44FR for a disc brake or #TK71-756-00 for a drum brake setup.

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout part #DX29FR for disc brakes and part #DX27FR for drum brakes use 1/2" diameter mounting hardware. We have used both grade 5 and grade 8 bolts when doing installations of them but the…

If you are using a drum brake actuator on a trailer with disc brakes what you'll normally experience is weak brake action. If your brakes are locking up and making the hubs hot it should not be because of that. Most likely they ended up damaging…