Can Dexter 10 Hub and Rotor # K08-435-05 be Used on EZ Lube Spindles
Question:
are these for a ez lube system. i have a 1987 ranger trail trailer and i need the hubs replaced. it has a zerk fitting on the end of the spindle. thanks
asked by: Parker S
0
Expert Reply:
The Titan 10" Hub and Rotor # K08-435-05 that you referenced can be used with EZ lube spindles. In order to do that you'd need to use the correct grease caps and you'd be set. For that all you need is the part # RG04-040 which has the removable center sections to make it EZ lube spindle compatible.
expert reply by:
Jameson C
0
Products Referenced in This Question
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Video: Review of Dexter Axle Trailer Hubs and Drums - Hub with Integrated Rotor - K08-435-05
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Shop: Replacement Ball with Nut For Buyers Combination Pintle Hook - 2-5/16" Diameter
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Replacement Ball with Nut For Buyers Combination Pintle Hook - 2" Diameter
- Search Results: trailer leaf spring kit
- Search Results: spring
- Search Results: trailer spring
- Search Results: trailer leaf spring suspension
- Search Results: shackle kit
- Search Results: xlprolube1980
- Search Results: khr10d
- Shop: Kodiak XL ProLube Oil Bath Hub Body and Cap - 2.440"
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitch - 2-5/16" Ball - 2" Drop - 20K
- Q&A: Availability of Oil Bath Hub/Rotor for 6K Axle on EZ Loader Trailer
- Shop: Towing Mirrors
- Shop: Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Most Popular Wheel Bearings
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Video: Choosing the Right Trailer Wiring
- Shop: Gooseneck Hitch
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Suspension Enhancement
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)