Customers compare AM20532 to these similar products
Products Featured in this Video
Today we're going to review part number AM20532. This is the Dexstar 15" by 6" Steel Wide Spoke Trailer Wheel, with the 6 on 5-1/2" bolt pattern, and a white powder coat finish. This wheel is made of a sturdy steel construction, has a white powder coat finish over an e-coat primer for excellent corrosion resistance. As you can see, it has the 8 spoke pattern design. This is a high quality wheel… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Vesper Steel Modular Trailer Wheel #TA65VR was either made in Mexico or Brazil. When I reached out to my contact at Taskmaster he said those are the places that manufacture their wheels and without seeing a specific wheel he wouldn't be…
view full answer...Even when stored in the somewhat controlled environment of a garage, tires are still subject to dry rot and flat spotting. Even if the tire tread has plenty of depth left and you can't see any cracking with the naked eye, the generally…
view full answer...I called my contact at Dexter and they sent me the information about your axle. It is a 3,500 lb torsion axle with electric brakes and a hub with a 6 on 5-1/2 bolt pattern. We do not carry this axle so if you are looking for an exact replacement…
view full answer...You would need to measure the inside diameter of the hub opening to determine which cap size is needed. You would want to choose a cap whose outside diameter matches the inside diameter of the hub. Some of the most common sizes are 1.980 inch,…
view full answer...Trailer wheels that are 14.5 inches in diameter are hard to find as half sizes like this are not common at all. The overall diameter of the tire size 7-14.5 is 27.7 inches. The most similar diameter trailer tire size is the 205/75-15 which has a…
view full answer...Dexstar steel trailer wheel #AM20532 is rated for 2,830 pounds at 80 psi. It will fit on a hub with a 6 on 5-1/2 bolt pattern. This bolt pattern is typically found on 5,200 and 6,000 pound axles but in some cases can be found on 3,500, 2,200, and…
view full answer...The wheel and tire combos we sell are not balanced at the factory. When the tire is mounted to the wheel, the high (heavy) spot on the wheel is matched to the low (light) spot on the tire, which leaves the wheel and tire somewhat balanced. You may…
view full answer...The Karrier ST225/75R15 Radial Tire with 15" White Spoke Wheel #AM32680 will definitely be a good option for a spare. There is really only one bolt pattern used for 6 lug wheels on trailers, and Airstream follows that standard when they use…
view full answer...You're correct. A 6 on 5-1/2 inch bolt pattern will have 6 lugs with a 5-1/2 inch bolt circle. That means that if you measure from the center of one bolt across the hub to center of the opposite bolt, that distance will be 5-1/2 inches. I'll…
view full answer...When fitting wheels to a Dexter Trailer Hub Assembly, #8-213-5UC1, you would need to measure the wheels you are trying to use. You would measure the bolt pattern, the center hole diameter, and the stud size. To measure the bolt circle on a 6 lug…
view full answer...You should be fine as most people do not have trailer wheels and tires balanced, but if you are having a shop mount the tires, and you want to have them balanced, it probably would not cost much more to have the setup balanced as well. One reason…
view full answer...The reason for that is because in most cases the psi limit is the valve stem of the wheel and not the actual wheel. The wheel will have a higher psi rating than the tire and the valve stem so it's usually not listed.
view full answer...