Dexstar Tires and Wheels - Wheel Only - AM20504 Review Video

The Dexstar Conventional Steel Wheel with Offset #AM20504 is an excellent replacement option for your application as it fits the Goodyear Endurance ST205/75R15 Radial Tire and your baby moon hubcaps perfectly! Just be sure to check and make sure the…

The Dexstar Conventional Steel Wheel #AM20504 is 6" wide with a 1/2" positive offset. This gives you a backspacing of 3-1/2".

Technically if the bolt pattern and weight ratings are compatible with your vehicle then you can fit trailer wheels on a car but the biggest problem you are going to have is proper tire placement. Vehicles use wheels with high positive offsets which…

I'll start off by saying that when it comes to wheels that are rated for the weight of your trailer and are 15" wheels with a 5 on 4.5 bolt pattern, we have a very limited selection of wheels that have a +0.5 offset (which is the largest…

For a 15 inch conventional steel wheel with a 5 bolt pattern, I recommend looking at the Dexstar Conventional Steel Wheel #AM20504. This black powder coated, 15 inch steel trailer wheel features a 5 on 4-1/2 inch bolt pattern. You will just want to…

The B78-13 tires you mention convert to metric size 175/80-13. The 175/80-13 tires are available in three load ratings. B: 1100 lb at 35 psi C: 1360 lb at 50 psi D: 1610 lb at 65 psi You would choose the load rating based on the capacity of your…

We don't carry vehicle rims, but we are aware that many people use trailer wheels like our Dexstar Conventional Steel Wheel with Offset - 15" x 6" Rim - 5 on 4-1/2 - Black, #AM20504 along with the Americana Baby Moon Trailer Wheel…

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

I have included a picture that shows the measurements needed for a spindle, bearings, seals, faces, and hubs. The spindle measurements are labeled A through F. A is the spindle shaft diameter B is where the grease seal sits C is where the inner…

Your understanding of the wheel offset is correct. With a positive 0.5 inch offset the wheel moves toward the trailer 1/2 inch, resulting in 2 inches of the wheel in front of the hub and 3 inches of the wheel behind the hub. (Negative offset would…

The spare tire can be mounted near the wheel and axle to the frame, but you will want more than 5 inches of ground clearance. I recommend the Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson #DL22145 based on your photo. Every extra inch…

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…