Review of Dexstar Tires and Wheels - Wheel Only - AM20304 Video

Yes there are! In fact, there are two - the Dexstar Conventional Steel Wheel #AM20304 is a 14" wheel with a +0.5" offset and has a 5 on 4-1/2" bolt pattern and has a Black powder coat finish. The other option is the Dexstar #AM20334…

I attached a picture that shows what type of lighting requirements are needed for a trailer over 80 inches in width as well as a link down below that covers this as well.

When it comes to a 205/75R14 trailer tire like the Kenda, #AM10234, this size of tire will fit a 5", 5-1/2", 6", or 6-1/2" rim. I spoke with our in-house tire expert and he said that when it comes to choosing a rim for a trailer…

From the information that I was able to find on the L44549 bearing, it shows it being a 1-1/16 inch bearing which is the same as Trailer Hub Bearing, #L44649. Just to be sure, I recommend measuring the L44549 bearing with a digital caliper to confirm…

A keel roller is not designed to carry the bulk of a boat's weight. That is the job of the bunks, whether they are wobble roller bunks like yours, standard roller bunks or carpeted bunks. Also, it is not a good idea to mount any of these boat…

Wheel #AM20214 has a positive offset meaning that the mounting surface is further way from the trailer. This makes the tire closer to the trailer by 1/2 inch. A 165-13 is not a common trailer tire size but it would be 6-1/2 inches wide. A 185/80-13…

Here is a list of the wheels we have which will fit the Kenda Karrier ST185/80R13 Radial Trailer Tire #AM10208 with a 5 on 4-1/2" bolt pattern. Please let me know if your hub uses a different bolt pattern. Aluminum Hi-Spec Series S5 Trailer…

The 1/2 inch positive offset of trailer wheel #AM20504 (which is a 15 inch and not a 13 inch)means that the wheels would be closer to the trailer frame than a model with zero or negative offset. From the mounting surface to the outer edge of the…

Trailer wheels like those available on our site usually have a zero offset, meaning the rim of a trailer wheel lines up directly under the center of the wheel. So when that is the case, there will not be an offset specification in the description or…

The Dexstar Conventional Steel Wheel, part #AM20304 could be used on a passenger vehicle, as long as the vehicle's hubs use a 5 on 4-1/2 inch bolt pattern and the wheel's 1870 lb capacity isn't exceeded (7480lb for 4 wheels.) The wheel…

Yes, the disc of the 7-Piece Installation Set for Bearings #PTW83020 that measures 1.965 inches would be the correct one to use with a race part #L44610. I attached a review video for this that shows how it works as well.

The Wesbar license plate bracket part number 003201 that you referenced is a universal license plate bracket just like the Optronics Trailer License Plate Bracket part #LP15SB. To see if the mounting holes would line up check out the dimension…