Recommended 15 Inch Conventional Steel Wheel and Baby Moon Caps for Trailer
Question:
I am looking for steel wheels and baby moon hubcaps for a 1966 Ken-Craft 20 ft. travel trailer with dual axles. The wheels must be able to support the 3700 lb. weight of the trailer. The wheels on it are mismatched, 15 inch 5 bolt.
asked by: Kim
Helpful Expert Reply:
For a 15 inch conventional steel wheel with a 5 bolt pattern, I recommend looking at the Dexstar Conventional Steel Wheel # AM20504. This black powder coated, 15 inch steel trailer wheel features a 5 on 4-1/2 inch bolt pattern. You will just want to make sure this matches the bolt pattern of your existing hubs. I have included an article that explains how to measure this.
This particular wheel has a weight capacity of 1,820 pounds. This means the combined load capacity of all 4 wheels on your trailer will be 7,280 pounds.
Then for a Baby Moon Trailer Wheel Center Cap, the Americana # AM90086 will work perfectly. This will snap right into place on the above mentioned wheels to give your trailer a nice, retro appearance.
I have included a couple short video demonstrations on these products that you can also check out.
Products Referenced in This Question
Americana Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel - Qty 1
- Wheel Covers Hubcaps
- Center Wheel Caps
- Front and Rear Wheels
- 5 Lugs
- 13 Inch Wheels
- 14 Inch Wheels
- 15 Inch Wheels
- Steel
- Americana
more information >
Product Page this Question was Asked From
Dexstar Conventional Steel Wheel with Offset - 15" x 6" Rim - 5 on 4-1/2 - Black
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Q&A: Replacement Wheel Fitment for 2019 Riverside RV Retro Camper
- Shop: Dexstar Conventional Steel Wheel with Offset - 15" x 6" Rim - 5 on 4-1/2 - Black
- Video: Dexstar Tires and Wheels - Wheel Only - AM20504 Review
- Article: Trailer Tire Sizing
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Measuring a Trailer Tire
- Q&A: 15" Trailer Wheels with 5 on 4.5 Bolt Pattern and +Offset
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2 - Silver Powder Coat
- Search Results: tire monitoring system
- Search Results: tpms
- Q&A: Vintage Style Trailer Rims With Baby Moon Cap
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Shop: Performance Chip Tuners
- Search Results: baby moon hubcaps
- Shop: Dexstar Conventional Steel Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black Powder Coat
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Americana Rubber, Snap-In Valve Stem - 1-1/4" Long - Up to 65 psi
- Shop: Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - Black Powder Coat
- Q&A: Recommended Replacement Tire for a 2020 Riverside Retro 190BH Trailer
- Q&A: Recommended TPMS System for Featherlight Horse Trailer
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - White Powder Coat
- Q&A: What is Wheel Offset on Dexstar Conventional Steel Wheel with Offset, Part # AM20504
- Shop: Suspension Enhancement
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: lug nuts
- Shop: Trailer Wiring
- Search Results: trailer jack
- Shop: Brake Controller