Customers compare AM20242 to these similar products
Products Featured in this Video
Today, we're going to review part number AM20242. This is the Dexstar 13" by 4.5" black steel mini-mod trailer wheel with the 4 on 4" bolt pattern. This steel wheel has the module design, and the module design is when it has the round holes that go all the way around the edge. It's very sturdy. It's very corrosion resistant. They do use a two step finishing process on this.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I have a solution for you, but we do not have any hubs that use inner bearing #L44649 and outer bearing LM11749. This is an old bearing combination no longer used so replacement hubs aren't around anymore. It is for that reason that the best…
view full answer...The Front Suspension Enhancement System that is designed to fit your 1985 G30 Van I recommend is part #TGMFG20. This system provides additional support and helps maintain stability when carrying heavy loads. No drilling is required for installation…
view full answer...The Dexstar 12" X 4" Steel Mini Mod Trailer Wheel #DEX44FR has an outer width of 4-5/8" and the tallest portion of the wheel is 13-3/16".
view full answer...We have a full replacement for your light. The Command Electronics #CE86FR. Take a look at the attached video to see them in action.
view full answer...On a 13 x 4-1/2 inch wheel such as #AM20202, you can use tire size 175/80-13 or size 185/80-13. I have included links to the tires we have in each of these sizes. I have also included a link to our help article on trailer tires for you to view.
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...The eZ latch of the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K #DM16680-52 is absolutely just as safe as a slide lock coupler. It doesn't use a pin but still exceeds the SAE J684 safety…
view full answer...The tire size ST175/80R13 is pretty standard, so we can definitely get you replacements for the tires. I suggest going with the Taskmaster Provider ST175/80R13 Radial Tire #TTWTRTM1758013C. These are rated up to 1,360 pounds at 50 psi and also has an…
view full answer...The 4 on 4-1/2 bolt pattern that you referenced is not very common. I'm sorry to say it is also not among the configurations we have available for 13 inch wheels. From what I have found, this style is an old automotive bolt pattern that will be…
view full answer...When changing out the exact same tire size of ST175/80D13, you won't have any size difference between a Bias ply Trailer Tire like #TTWTD17513C and a Radial tire like #TTWTRTM1758013C. They will have the same diameter of 24.02 inches and same…
view full answer...The recommended clearance for a trailer tire is at minimum 4" from the top to the bottom of the fender. The 185/80-13 tires you have now measure 24.4" diameter x 7.2" wide. The 175/80-13 tires you are wanting measure 24" diameter…
view full answer...You would need a tire with more weight capacity. Basically you need to take the total weight of the trailer when loaded and ready to tow and divide that number by the amount of tires the trailer has and that's the minimum tire weight capacity…
view full answer...