Solution for Replacement Hubs on Boat Trailer With L44649/LM11749 Bearings
Question:
Hello. I have an old, small boat trailer. The wheel hub is four lug and stamped ODD-1106 there may be another letter before ODD. Bearings are Timken L44649 and Timken LM11749. The seal is Timken 7994s. The hub dust cap diameter appears to be just barely over 1.5. Any chance you have a replacement hub, or can suggest an alternate? Thanks so much!
asked by: Stephen
Expert Reply:
I have a solution for you, but we do not have any hubs that use inner bearing # L44649 and outer bearing LM11749. This is an old bearing combination no longer used so replacement hubs aren't around anymore. It is for that reason that the best option is to replace your axle with one that uses a standard bearing combination.
Based on the bearings, what you have is likely a 2,000 lb axle. I recommend checking the axle tag to verify this information. In addition to the capacity, you will also need the length of the axle. This is the hub face to hub face measurement. You can also get the spring center to spring center measurement, although the spring seats can be moved if needed.
For example the Trailer Axle with Idler Hubs # e25GR has a hub face to hub face measurement of 60" and a spring center to spring center measurement of 48". This axle uses the # L44649 inner and outer bearings and includes hubs with a 4 on 4 bolt pattern.
If you find your measurements are the same you could use this as a replacement. If you find that they are different let me know and I will see what is available.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: Can Hubs of etrailer Axle part # e25GR be Used on Boat Trailer and Get Submersed
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Search Results: lm11749
- Q&A: Replacement Hub for an Old Boat Trailer with Outer Bearing LM11749 and Inner Bearing L44643
- Article: The Differences Between Cam Buckles and Ratchet Straps (And Who Would Win In a Fight)
- Video: Dexstar Tires and Wheels - Wheel Only - AM20242 Review
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung
- Shop: Timbren Rear Suspension Enhancement System
- Shop: RoadActive Suspension Custom Leaf Spring Enhancement Kit
- Shop: Suspension Enhancement
- Search Results: timbren gmrtt35d
- Video: Review of Timbren Vehicle Suspension - Rear Axle Suspension Enhancement - TGMRC55
- Video: Optronics Trailer Lights - Tail Lights - TLL9RK Review
- Video: Optronics LED Combination Trailer Tail Light Kit Review
- Search Results: boat trailer wiring harness
- Search Results: lm11949
- Search Results: 145r12
- Search Results: 145r12
- Search Results: l44649
- Q&A: Getting Side Marker Lights to Function as Turn Signals and Running Lights
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T3584F-8974 Review
- Video: Review of CE Smith Trailer Axles - Leaf Spring Suspension - Square Trailer Axle - CE33201GA
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Q&A: Availability of ST205/75R14 Trailer Tires In a Load Range E or F
- Q&A: Is There A Maximum Speed Rating For A Trailer Axle?