This 13" x 4-1/2" steel trailer wheel has a 5 on 4-1/2 bolt pattern and a 2.99" pilot diameter. Beveled stud holes keep wheel secure when mounted on your axle. Acrylic enamel finish resists damage better than powder coat finishes.
Features:
Specs:
Durable Acrylic Enamel Finish
This wheel has a durable acrylic enamel finish on the front. The finish is applied after the wheel goes through an environmentally safe zinc phosphate pre-treatment and is coated with an e-coat primer layer. Compared to powder coat finishes, this finish resists getting chipped from flying road debris or scraped from hitting a curb for a longer period of time. These acrylic enamel wheels performed for more than 1,000 hours in salt spray tests.
The stud holes on this steel wheel are beveled to ensure that the wheel stays tight against your trailer hub. This also eliminates the need to constantly retorque the lug nuts.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Vesper 13" x 4 1/2" silver modular steel trailer wheel. It's a 5 on 4-1/2" bolt pattern. Now this is a steel wheel, has the modular design with a nice silver finish to it. When we say modular design, that's the one that has these round holes all the way around the wheel. This wheel uses a silver acrylic enamel finish to resist chipping and other damage better than the standard powder coat finishes.
This finish is applied after a zinc phosphate pre-treatment and then it covers an eco primer layer. This does give you excellent corrosion resistance, has a salt spray rating of more than a thousand hours. Now this wheel does use the beveled stud holes to help keep your wheels securely in place on your trailer hub. Eliminates the need for constant re-tightening of your lug nuts. If you notice the valve stem is included, it is pre-installed, ready to go.
Now this wheel does not come with a center cap. If you do want a center cap, we do sell them separately on our website. You do wanna make sure to get a center cap that'll have a diameter of 2.99 inches. That's the diameter of the pilot hole here that your center cap will fit through. Now this wheel does meet the SAE J1204 standards.
Few dimensions on this I wanna measure for you is the diameter and the width. So diameter is always measured inside to inside. So we take our tape measure, and if we go inside inside, there's your 13 inch diameter on the wheel. The width will be the same way. It's inside to inside, or bead seat to bead seat.
There's your four and a half inch width. Now the bolt pattern on this wheel is a five lug 4-1/2" bolt pattern. And if you want to measure that on a wheel, it's an odd number of lugs. Like in this case, five, what you'll do is pick any hole, let's say this one, and then you're going to measure across to either one of these holes right across from it. You just pick either one, but when you measure, it's from the center of the starting hole to the furthest edge of the hole that you measure to. On this one, it'll measure four and a half inches, so that means it's a five lug 4-1/2" bolt pattern. This does use a wheel lug size of 1/2" by 20, and the weight capacity on this wheel is 1,660 pounds. But that should do it for the review on the Vesper 13"x4-1/2" silver modular steel trailer wheel with the five on 4-1/2" bolt pattern..
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
This 13" x 4-1/2" steel trailer wheel has a 5 on 4-1/2 bolt pattern and a 2.99" pilot diameter. Beveled stud holes keep wheel secure when mounted on your axle. Acrylic enamel finish resists damage better than powder coat finishes.Everything was packaged well and arrived in less than a week once ordered.
Staff was helpful in finding the correct rims for my boat trailer.
Quick service
Do you have a question about this Trailer Tires and Wheel?
Condition: Surface Scratches
Notes: item has minor cosmetic paint chips along the edge. Otherwise new and unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.