Curt Gooseneck and Fifth Wheel Adapters - Adapts Truck - 16310 Review Video

As long as your fifth wheel hitch was designed to fit the industry standard fifth wheel rails that are 22 inches apart then yes, the Curt X5 part #16310 that you referenced would fit your B and W hitch and work well. I attached an install video for…

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball #DM8550046 is designed specifically for standard 4" tall, 2-5/16" recessed gooseneck ball mounts; the top of the ball needs to be no more then 3/4” from the…

The factory rail kit is also known as the factory prep package on your 2017 Ford F-250. The difference is that the prep package includes the 4 holes plus the gooseneck hitch ball hole in the center. You can see an example of this in the attached…

We do carry the Replacement Latch Pin Handle for B&W Turnoverball Underbed Gooseneck Hitch #BW1900-2-2007 but we do not currently have the spring. You should be able to get it through B&W though.

Yes, the Curt X5 Fifth Wheel Adapter for B&W Square Shank Turnover, will allow you to use your Reese 15K Fifth Wheel hitch. The Curt Adapter works with Curt 16K and 20K hitches as well as Reese Fifth Wheels up to 20k among other manufacturers.

Sounds like your trailer has electric brakes already and you are just looking for a way to wire up your Curt brake controller in the motorhome. Wiring up a brake controller is pretty easy actually. It's just a matter of running 4 wires. You would…

The size of the hitch ball itself is the same but there are differences between the standard hitch balls and a gooseneck ball. The shank on a standard hitch ball like the hitch ball you came from, part #BWHB94005, is threaded so that the nut can be…

Sounds like you may not have a B and W gooseneck hitch since that brand uses square holes. Could you possibly check under the truck bed to see if you can see a brand? With more info I could see if we have a suitable adapter.

From the center of the mounting tube in the middle of the Curt X5 adapter part #16310 it measures 8 inches to the nearest rail edge and then 11 inches from the center of the adapter to the center of the rail slot. I attached a picture that has all of…

If you already have a B&W Turnoverball Underbed Gooseneck Trailer Hitch then all you need to install standard base rails is an adapter, the Demco 5th Wheel Base Rails Adapter part #DM6140 or the Curt X5 5th Wheel Base Rails Adapter part #16310.…

There is not a bracket kit that would allow both a fifth wheel and a gooseneck hitch to be installed together, however there are solutions that might allow you to swap back and forth, depending on what you currently have installed. If you have…