Brophy Tie Down Anchors BP12 Review Video

We do have wheel chock for motorcycles. The Flint Hill Goods Adjustable Wheel Chock #FHG37ZR will cradle the tire to help hold the bike in place while you attach the straps. If you have e-track in your trailer the CargoSmart Motorcycle Wheel Chock…

You can mount the E-Track Trailer Cargo Control, #EM59150, using wood screws if the mounting surface is wood. If it is sheet metal, I would use sheet metal screws. Basically, match the screw with the material you are mounting to. There is no…

It depends on how much load you will be applying to the track, what you are holding with it, and how the trailer frame is made. If you can get to the trailer frame, use nuts and bolts to attach through the floor and the metal trailer frame. If you…

With plywood walls that are as thin as yours, it's possible that they may not support what you are looking to do. The only way you will be able to utilize the Erickson Horizontal E-Track #EM59150 (2 feet) or #E19148 (5 feet) is by installing…

Installing the E-Track Trailer Cargo Control, part #EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer. You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described.…

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things…

That's a great question. I believe your installation method for the Erickson Horizontal E-Track #EM59150 sounds like a great plan as long as you have the tracks facing the direction of travel. Basically the E-Track was designed around this…

I would recommend using the galvanized lag bolts you refer to. Due to the thickness of the floor, I do not think it would be necessary for all the lag bolts to go through the flooring and bolt to the frame, but having the 4 at each end and two in…

That is a good question, and you will need to use three backing plates for each 5 foot section of e-track, so the exact part you will need is the following: - etrailer E-Track Backing Plates w/ Hardware - Qty 3 #e46RR These will fit perfectly with…

Installing the E-Track system to your enclosed trailers upright frame is a good idea for the strongest mounting location and cutting the plywood out to fit around the E-Track would not be an issue that I can see as long as the plywood sides have…

To secure the Erickson Horizontal E-Track #EM59150 you need to use the E-Track Backing Plates #e66RR to secure them to the floor. The screws can easily pull out of the plywood especially considering your van will be absorbing a lot of road shock.…

It looks like each chock and strap from 2 of #EM09160 will need to be able to hold around 375 pounds to handle the weight of the 2014 Arctic Cat Wildcat X Limited and that is just static load and does not include the forces applied to the chocks…