Brophy Backing Plate for D-Ring Tie-Down Anchors Review Video

It depends on how much load you will be applying to the track, what you are holding with it, and how the trailer frame is made. If you can get to the trailer frame, use nuts and bolts to attach through the floor and the metal trailer frame. If you…

For your application you would want to use the E-track backing plate part # e96RR so that you can secure the track to the floor adequately. This would work well with the #EM59150 and would allow it to have enough capacity. It installs on the opposite…

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things to…

There needs to be some type of strong structural component on your trailer where you want to mount the Erickson Horizontal E-Track #EM59150. There is nothing that I can recommend which will ensure they will be strong enough unless your trailer has…

With plywood walls that are as thin as yours, it's possible that they may not support what you are looking to do. The only way you will be able to utilize the Erickson Horizontal E-Track #EM59150 (2 feet) or #E19148 (5 feet) is by installing it…

That's a great question. I believe your installation method for the Erickson Horizontal E-Track #EM59150 sounds like a great plan as long as you have the tracks facing the direction of travel. Basically the E-Track was designed around this and…

If you wanted to install E-track like the #EM59150 directly to a wood floor using wood screws you could but you'd want to put a screw in each mounting hole like you mentioned. This attachment method would easily allow the track to have it's…

I would recommend using the galvanized lag bolts you refer to. Due to the thickness of the floor, I do not think it would be necessary for all the lag bolts to go through the flooring and bolt to the frame, but having the 4 at each end and two in the…

Installing the E-Track Trailer Cargo Control, part #EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer. You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described.…

That is a good question, and you will need to use three backing plates for each 5 foot section of e-track, so the exact part you will need is the following: - etrailer E-Track Backing Plates w/ Hardware - Qty 3 #e46RR These will fit perfectly with…

A 5 on 4-1/2" bolt pattern on a trailer wheel will use a 1/2" bolt with a 60-degree cone. I have linked our selection of bolts that meets this criteria for you to filter through. One of the most popular is the CE Smith Trailer Wheel Lug Nut…

To secure the Erickson Horizontal E-Track #EM59150 you need to use the E-Track Backing Plates #e66RR to secure them to the floor. The screws can easily pull out of the plywood especially considering your van will be absorbing a lot of road shock. You…