Review of Blue Ox Trailer Hitch Ball Mount - Adjustable Ball and Pintle Mount - BLU75XR Video

Sorry for the confusion Michael but the Draw Tite hitch part #76290 that you referenced is a confirmed fit for your 2024 Honda Passport Black Edition. To use the Curt Echo Mobile brake controller #C51180 you would need a functional 7-way at the rear…

To lock the Blue Ox Adjustable 2-Ball Mount #BLU75XR to your trailer hitch and the ball mount to the shank section I recommend picking up the Curt Lock Set #C23556. This includes a standard locking hitch pin as well as one that's a bit longer.…

The mounting holes for the ball mount on the Channel Style Adjustable Ball Mount #C45900 are 1" apart on center. I have attached a photo demonstrating this and some other measurements for you as well.

A sway control system is not really a requirement but it is always good to have as it will help you keep the trailer under control during strong winds, curvy roads, or sudden maneuvers. The best type of sway control system for you is really going to…

Hitch pins like #C23556 do not have a weight rating or shear strength data because their actual capacities far exceed the abilities of the hitch or vehicle. Basically, the hitch or some other component would fail before the pin even comes close. The…

The Draw-Tite bracket for 7-way #18138 will mount at a right angle with pre-drilled mounting holes. The hole diameter, which will fit the majority of 7-way connectors, is 2-1/16 inches. I went to our warehouse to get this part and provide you the…

The Flint Hill Goods adjustable ball mount part #FHG92VR would have clearance to work with your Draw Tite hitch #75758 on you 2019 Ford Escape and would give you the 6 inches of rise you are looking for as well.

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

It doesn't look like we have an exact replacement coupler latch kit available for your trailer coupler. Your best option would be to replace your coupler with something like the #CA5100B which is also a A-frame coupler designed for a 2 inch ball…

The Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches #ERT00108 requires at least 1" of the shank to properly fit. I went out and measured the shank on the Curt Adjustable 2-Ball Mount #C99NR and found the from the center of…

I spoke with Blue Ox who stated that the the inside channel of the Blue Ox Adjustable 2-Ball Mount #BLU75XR is approximately 2" wide. That being said, when you look at the pictures it's clearly about a 1/2" - 1" wider than the…

This is a reason we measure and label our site all the same way rather than going off the description or title from our manufacturers. On the BulletProof Hitches 2-Ball Mount #BPH64FR it is capable of a 4" total drop or 4" total rise. The…