Adjustable Ball Mount 6 inch Rise that Fits 2019 Ford Escape with Draw Tite Hitch

Question

Question:

I have a 2019 Escape. I have the Draw Tite #75758 hitch installed. I need a bun that has approx a 6 inch rise and will clear the bumper facia. I cannot find any measures on your site regarding these dimensions. What can you advise? The Flint-Hill - FHG92VR is a long shank - is this the one I need? Please advise - Thanks!

asked by: Joe M

0

Expert Reply:

The Flint Hill Goods adjustable ball mount part # FHG92VR would have clearance to work with your Draw Tite hitch # 75758 on you 2019 Ford Escape and would give you the 6 inches of rise you are looking for as well.

expert reply by: Jameson C

0

Answer 1

To lock the Blue Ox Adjustable 2-Ball Mount #BLU75XR to your trailer hitch and the ball mount to the shank section I recommend picking up the Curt Lock Set #C23556. This includes a standard locking hitch pin as well as one that's a bit…

view full answer...

Answer 2

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion…

view full answer...

Answer 3

I have a solution for you but I was unable to find any wiring diagrams that specify which wires are which on the 2015 Nissan Titan. Because of this, you'll need to manually trace and test each wire to determine which wire controls which…

view full answer...

Answer 4

Using a suspension enhancement system like the AirLift 1000 Air Helper Springs, part #AL60732 will not increase the load-carrying or tongue weight capacity of your 2015 Sienna. These are designed to help cushion heavy loads and help keep the vehicle…

view full answer...

Answer 5

When hardwiring a 7-Way to your 2005 Chevrolet Silverado, like part #PK12-707E, you will want to connect the following functions to the following pin locations: 1 o'clock - 12V Power 3 o'clock - Right Turn/Stop 5 o'clock - Brake…

view full answer...

Answer 6

Are you looking at the Blue Ox SwayPro weight distribution shanks, like part #BXW4002? If so, Blue Ox does not give these shanks a specific class rating. All of their shanks fit 2 inch trailer hitches and have a maximum towing capacity of 15,000 lbs…

view full answer...

Answer 7

The Buyers Products Replacement Tri-Balls #3373020620 for Adjustable Tri-Ball Hitch #3371802225 is 1" from the hitch pin center hole to the end of the hitch tube(see image). This is the same measurement for all the mounting holes as they are in…

view full answer...

Adjustable Ball Mount 6 inch Rise that Fits 2019 Ford Escape with Draw Tite Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching