Review of Blaylock Industries Gooseneck Trailer Locks - Gooseneck Base Lock - BLTL-50-40D Video

For a gooseneck coupler lock, you would want #BLTL-55-40D for RAM gooseneck couplers or #BLTL-50-40D for Bulldog/Stallion/Superior/T.E.M. couplers.

The physical difference in terms of appearance between various well-known gooseneck coupler manufacturers is hard to spot because they all are fairly similar. The biggest difference comes with the width of the coupler flange. The best way to…

The large round washer included with the #BLTL-51 measures 2 inches in diameter, the inner diameter is 13/16 of an inch and the washer is .139 thick. I'll provide a photo showing these dimensions.

Yes, the EZ Lock Gooseneck Coupler Lock Combo #BLTL-53-40D2 that you referenced comes with two locks and would work well on your 20k Bulldog Coupler. One lock secures the coupler opening and the other secures the inner tube of the trailer to the…

I do have a few possible solutions for you, however we do not currently offer a product that would allow you to have everything in your system keyed-alike. Depending on the tow vehicles you drive, I recommend looking at the BOLT Trailer Hitch…

Yes, the EZ Lock Gooseneck Coupler Lock Combo part #BLTL-53-40D2 will work with a Bulldog gooseneck coupler. I have attached a photo of the above lock installed on a Bulldog gooseneck coupler for you as well. The EZ Lock Gooseneck Coupler Lock Combo…

The Blaylock EZ Lock Gooseneck Coupler Lock part #BLTL-50-40D that you referenced works with most adjustable gooseneck couplers therefore it should work with yours as well and after looking at your photos I don't see any apparent issues. That…

Yes, all of the locks and keys in the Trimax Stainless Steel Padlocks with 3/8" Shielded Shackle Set #TMX48ZR are keyed alike so you don't have to keep track of all that!

To find the correct landing gear length make sure your 2009 Sandpiper is on level ground and you will need to measure from the trailer's mounting brackets to the ground to find out the correct length; we do not have specs on individual trailers…

I would be happy to help you find the correct replacement landing gear for your 2011 Forest River Sandstorm 5th Wheel Toy Hauler, but based on the measurements you provided there is not an exact replacement option available. The closest options is…

If you have measured your landing gear like in the accompanying diagram and the frame clamps are 18-1/2 inches apart you have an uncommon spacing; you can use the Landing Gear Set #LG-183708 but would need to have a welder come in and remove your…

I have a few different options for you depending on the route you would like to take. However, regardless of which route you pursue you will need to take some measurements of your outer jack tube length and weld stop spacing. If you are handy and the…