Gooseneck Coupler Lock for a Sundowner Trailer

Question

Question:

I have 2 gooseneck horse trailers and neither gooseneck has the brand on it. I have a Titan and a Sundowner. How do I know which locks to purchase? Titan Gooseneck - White in pic - 7 1/2 x 5 Sundowner Gooseneck - Black in pic - 7 x 5

asked by: Cammy

1

Helpful Expert Reply:

The Blaylock EZ Lock Gooseneck Coupler Lock part # BLTL-50-40D that you referenced works with most adjustable gooseneck couplers therefore it should work with yours as well and after looking at your photos I don't see any apparent issues. That said, I was not able to identify the exact model you have based on either photo and the only way you will be able to do this is by reaching out to the trailer manufacturer.

I have attached a dimensional photo that may help with determining compatibility as well.

expert reply by: Conner L

1

click to enlarge

Answer 1

The 9" offset on the Shocker Hitch Air Cushioned Gooseneck Coupler item #SHK79MR does not increase tongue weight or reduce your truck's capacity it just pushes the connection point back for more clearance. This coupler has a 30,000 lbs…

view full answer...

Answer 2

Thanks for the picture of your gooseneck coupler, based on that I can tell that the Blaylock EZ Lock Gooseneck Coupler Lock #BLTL-50-40D that you referenced will fit and work well.

view full answer...

Answer 3

I recommend the Jensen RV Stereo #JWM60A to replace your Jensen Voyager AWM900 in your RV. This has almost identical overall dimensions (10-7/16" wide x 7" tall x 6-1/2" deep) and mounting dimensions (9" wide x 6" tall x…

view full answer...

Answer 4

For your 2019 Forest River Forester Motorhome, check out the: -Greystone Standard RV Microwave w/ Trim Kit #324-000106, & -The Furrion Over the Range RV Convection Microwave #FMCM15SS. Either of these microwaves will work great in your motorhome,…

view full answer...

Answer 5

The closest lug nut we carry to what you are looking for is the part #AM90070 as it is a 1/2-20 lug that will use a 7/8 inch wrench. Only thing is it is only 2-3/32 inches long and is stainless steel not chrome plated.

view full answer...

Answer 6

Yes, all of the locks and keys in the Trimax Stainless Steel Padlocks with 3/8" Shielded Shackle Set #TMX48ZR are keyed alike so you don't have to keep track of all that!

view full answer...

Answer 7

The physical difference in terms of appearance between various well-known gooseneck coupler manufacturers is hard to spot because they all are fairly similar. The biggest difference comes with the width of the coupler flange. The best way to…

view full answer...

Answer 8

Thanks for the pictures of your gooseneck coupler. Based on seeing them we do know that the Blaylock EZ Lock Gooseneck Coupler Lock #BLTL-50-40D does fit.

view full answer...

Answer 9

We do not carry any lug nuts with a rubber gasket and I personally would not recommend using any rubber gaskets for lug nuts. The hubs on your 2018 Jayco North Point will generate a lot of heat from the brakes. This would cause the rubber to become…

view full answer...

Answer 10

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

view full answer...

Answer 11

Based on my research you will need the Chrome Trailer Wheel Lug Nut - 1/2" (Each) #12CLN, the Zinc-Plated Steel #CE11051, or the stainless steel #AM26NR.

view full answer...

Answer 12

The size socket used isn't necessarily going to be the same as the nut or stud thread size. It is usually larger since the outer width of a hex head is larger than the threaded diameter. Hub and drum assembly #8-219-13UC3 for 5,200 to 7,000 pound…

view full answer...

Gooseneck Coupler Lock for a Sundowner Trailer

Product Page this Question was Asked From

Continue Researching