Dimensions of Flat Washer Included With Blalock BLTL-51 Gooseneck Hitch Coupler Lock

Question

Question:

I have lost the large steel washer from a previous installation. Can you tell me what the specs are for that washer?

asked by: Eric K

0

Expert Reply:

The large round washer included with the # BLTL-51 measures 2 inches in diameter, the inner diameter is 13/16 of an inch and the washer is .139 thick. I'll provide a photo showing these dimensions.

expert reply by: Mike L

0

Dimensions of Flat Washer Inlcuded with Blalock BLTL-51 Goosneck Coupler Lock
(click to enlarge)

Answer 1

The physical difference in terms of appearance between various well-known gooseneck coupler manufacturers is hard to spot because they all are fairly similar. The biggest difference comes with the width of the coupler flange. The best way to…

view full answer...

Answer 2

I have some information that will help but the Blaylock EZ Lock Gooseneck Coupler Lock, #BLTL-50, is not tested on specific brands of trailers. This lock was designed to fit a gooseneck coupler like the Pro Series, #PS0287820300, which I have…

view full answer...

Answer 3

Hi Evon, Appreciate the photo, thank you, and while there is a lock option, the part number you mentioned won't work on your gooseneck coupler with the handle. There isn't a similar type of lock for the bottom of the coupler, the best have is…

view full answer...

Answer 4

Yes, this will work. The AMPLock Trailer Coupler Lock for Atwood Gooseneck and Flat Nose Couplers #AMP49FR is for Atwood Goosenecks, which it looks like you have. Using the pictures you provided it looks similar to the Atwood gooseneck coupler that I…

view full answer...

Answer 5

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY98GR weighs a hefty 120 lbs. This is the only way to add a gooseneck pin box to a 5th wheel trailer with a Rhino Box. You will also need the Safety Chain with 2 Hooks item #GY49GR. State laws…

view full answer...

Answer 6

You could remove your breakaway switch pin while your trailer is in storage, however, a determined thief will get what they want in the end. If he went through the trouble to break in and attempt steal your trailer, it would not be a problem for him…

view full answer...

Answer 7

They must have been talking about bumper pull trailers because there is no safe or sane way to pull a gooseneck trailer using the safety chains. The trailer would topple over or slide into the thief's vehicle. The best way to prevent someone from…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

In order to find the correct replacement fender for a trailer you'll need to know the wheel size. The CE Smith Single Axle Trailer Fender part #CE17960ATB seems to be a goof match but it's for 13" wheels. If this is not the size you have…

view full answer...

Dimensions of Flat Washer Included With Blalock BLTL-51 Gooseneck Hitch Coupler Lock

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching