Review of B and W Trailer Hitch Ball Mount - Adjustable Ball Mount - BWTS20037C Video

I went out to our warehouse to take a look at the B&W Tow & Stow 3-Ball Mount #BWTS20049B referenced in your question. I measured a total length of right at 11 inches of the vertical adjustment shank on the ball mount. I have attached a short…

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…

The Gen-Y Torsion 2-Ball Mount #325-GH-1824 that you referenced does now come with set screws on the sides of the square openings to allow the movement of the ball and retainer to be reduced. I attached a picture of them for you to check out. The…

The #RED44FR is the 331-EBRH-ACCV3, which is the 3rd version of the Redarc Tow Pro Elite controller that was originally only available in Australia; the #331-EBRH-ACCV2 is the 2nd version and has been phased out. They're really mostly the same…

The brake controller port for your 2019 Ram 3500 is a bit of an odd location relative to where the port is on other trucks; the port is underneath the control knobs like in the accompanying photo. You will be able to find the plug behind that panel,…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram. I couldn't find any information on the ANCOR brand so you would need to compare what you have to those dimensions to know if the accessories…

It looks like the pin part of the DO45 (which takes the place of a standard hitch ball) has a shank with a 1-1/4" diameter so I recommend using the Curt Heavy Duty Forged Ball Mount #C45340 with a Gen-Y hitch as this ball mount has up to a 17K…

If you are on the last adjustment of your 5 inch drop B and W Stow and Go you would want to go with the part #BWTS20049B especially once you lift the truck. On as big of a truck as what you have you would not have any issues with dragging either. I…

It looks like you have an Andersen Rapid Hitch Ball mount part #AM3410. The usable length of the pin that is used to lock the ball on the Andersen hitches is 4-1/4" so the 4" long Draw-Tite Trailer Hitch Receiver Lock part #63259 is not…

When determining what rise/drop to use on a B&W Tow & Stow, it is important that your trailer connection is as level as possible. The first thing you need to do is measure the height of your hitch receiver from level ground to the top inner…