Total Length of Vertical Shank on B&W Tow & Stow 3-Ball Mount # BWTS20049B

Question

Question:

what is the total length of the vertical adjustment shank?

asked by: Roger

0

Expert Reply:

I went out to our warehouse to take a look at the B&W Tow & Stow 3-Ball Mount # BWTS20049B referenced in your question. I measured a total length of right at 11 inches of the vertical adjustment shank on the ball mount.

I have attached a short video demonstration on this product that you can also take a look at.

expert reply by: Chris R

0

click to enlarge

Answer 1

It sounds like you are trying to decide between the B&W Tow & Stow 3-Ball Mount part #BWTS20049B which has 7" of drop and the B&W Tow & Stow 3-Ball Mount part #BWTS20048B which has 4-1/2" of drop. If…

view full answer...

Answer 2

The best option for larger trucks is without a doubt an adjustable ball mount that way you aren't stuck with a fixed ball mount that only works on certain trailers. The best option for this if you have the larger 2-1/2" receiver tube…

view full answer...

Answer 3

The advantage of the AirLift air spring systems that have an internal jounce bumper is that in the event of an air leak your Ram 1500 would not lose all of the extra suspension support. You would still have the internal jounce bumper as a fail-safe…

view full answer...

Answer 4

The B&W silencer pad, part #BWTS35025, fits all of the 2-1/2 inch B&W Tow & Stow ball mounts, like part #BWTS20049B as an example. With that being said, since trailer hitch pin holes aren't all at the exact same depth sometimes you…

view full answer...

Answer 5

If you are on the last adjustment of your 5 inch drop B and W Stow and Go you would want to go with the part #BWTS20049B especially once you lift the truck. On as big of a truck as what you have you would not have any issues with dragging either. I…

view full answer...

Answer 6

The B and W Tow & Stow 3-Ball Mount #BWTS20049B that you referenced would be a great choice for your situation. It fits the 2-1/2 inch hitch your 2019 Ford F-250 has, gives you all three popular hitch ball sizes, and can do a drop of up to 7…

view full answer...

Answer 7

I took a measurement of the B&W Tow & Stow 3-Ball Mount #BWTS20049C and found from the base to the bottom of the receiver it measured about 8-1/4 inches while the overall vertical measurement was about 11 inches. I have made a photo for you…

view full answer...

Answer 8

I went out to our warehouse to take a look at the B&W Tow & Stow 3-Ball Mount #BWTS20048B and measured a distance of right at 5-1/2 inches from the bottom of the shank to the lowest point of the vertical adjustment post. I have attached an…

view full answer...

Answer 9

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 10

In order to choose the correct B&W Tow & Stow 3-Ball Mount you'll need to measure the distance from the ground to the top inside edge of the trailer hitch and then subtract the distance from the ground to the bottom of the trailer coupler…

view full answer...

Answer 11

Since you use all three common ball sizes regularly I recommend an adjustable ball mount that comes with all three since there isn't a 1-7/8 and 2 inch combo for #C45902. There are several options for a 2-1/2 inch hitch such as #BWTS20049B. I…

view full answer...

Answer 12

The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…

view full answer...

Total Length of Vertical Shank on B&W Tow & Stow 3-Ball Mount # BWTS20049B

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching