B and W Gooseneck Trailer Coupler - Coupler with Inner Tube Only - BWTEXA4200 Review Video

Yourr trailer's coupler uses set screws to hold the tube in place instead of a cross pin. In this case you'll still use the set screws in the same fashion they're being used to install the Extend-A-Goose #BWTEXA4200 and you…

The outer diameter of the upper tube of the Andersen Ultimate Offset part #AM3140 is 4 inches.

I spoke with my contact at B and W and they informed me that when the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 is in the lowest position it has a height of 11-3/4 inches.

On your 2006 Nissan Titan Crew Cab with a 5-1/2 foot bed you will need to use a standard hitch with a Sidewinder. The Sidewinder will relocate the pivot point from where the king pin locks into the hitch 22 inches to the rear, to the point where the…

I spoke with B&W and they said you are able to use the B&W Extend-A-Gooseneck Coupler #BWTEXA4200 in a reverse offset position.

In general it's the safest to say that the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 shouldn't be used with flat bed trucks since the heel of the tube would hit the truck bed most likely. BUT if the cut area for the hitch was big…

You should have enough clearance, but here is the formula you can use to determine if you have enough clearance. You will need to know the width of the nose of your trailer as well. (A + B) - C = Clearance A = Distance from the gooseneck ball to the…

I went out into our warehouse and grabbed a B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 to get the dimension you are looking for and found it to be 20 inches from the top of the tube down to the weld where it attaches to the lower pipe. If…

The reason there are no offset gooseneck balls that fit the OEM gooseneck hitch of your 2019 Ford F-250 is because the shape of the gooseneck ball that fits your hitch being round. Since it's round and can rotate in the hitch any offset could…

The B&W Extend-A-Goose Gooseneck Coupler, part #BWTEXA4200 you referenced is designed to be able to attach to the inner tube on a gooseneck trailer and provide an additional 10 inches of clearance from your truck cab for your trailer. This…

The Demco Hijacker Autoslide #DM8550034 has a weight of 273 lbs. I've added a couple links to video reviews of this hitch for you to take a look at.

I do have a solution but I do not have a state by state breakdown of which ones will allow you to attach the safety chains directly to the gooseneck plate such as #RP58079. The safe bet is to just assume that none of the states allow it. Then you…