B and W Extend-A-Goose Gooseneck Coupler Review Video

Yourr trailer's coupler uses set screws to hold the tube in place instead of a cross pin. In this case you'll still use the set screws in the same fashion they're being used to install the Extend-A-Goose #BWTEXA4200 and you won't use…

I spoke with B&W and they said you are able to use the B&W Extend-A-Gooseneck Coupler #BWTEXA4200 in a reverse offset position.

The outer diameter of the upper tube of the Andersen Ultimate Offset part #AM3140 is 4 inches.

You should have enough clearance, but here is the formula you can use to determine if you have enough clearance. You will need to know the width of the nose of your trailer as well. (A + B) - C = Clearance A = Distance from the gooseneck ball to the…

As long as your horse trailer features a 4 inch diameter outer tube (which is pretty standard) the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 that you referenced will work really nicely to replace its inner tube. It will provide a 10 inch…

The pin holes in the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 are 3/4" in diameter for a 3/4" Pin #BD0233060301. The 8 holes are spaced 1" on center vertically for 8" range adjustment.

In general it's the safest to say that the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 shouldn't be used with flat bed trucks since the heel of the tube would hit the truck bed most likely. BUT if the cut area for the hitch was big…

The B&W Extend-A-Goose Gooseneck Coupler - 10" Offset #BWTEXA4200 should be a straight fit. If your coupler was not installed so the pin was horizontal, then there isn't another adapter that will fit correctly. The misalignment will be…

The B&W Extend-A-Goose Gooseneck Coupler, part #BWTEXA4200 you referenced is designed to be able to attach to the inner tube on a gooseneck trailer and provide an additional 10 inches of clearance from your truck cab for your trailer. This…

For a replacement lower section of the Ranch Hitch Universal 5th Wheel to Gooseneck Coupler Adapter with 8 Inch Offset #AM3139 you will want the Replacement Offset Coupler with Cable System for Ranch Hitch Coupler Adapter #AM3140. The #AM3140 is a…

I have a solution for you, but the #AM3140 will not fit on a standard gooseneck hitch as it is designed to fit a specific adapter. Instead we have the B and W Offset Gooseneck hitch part #BWTEXA4200 which provides 10 inches of offset and can fit 4…

I attached a picture of the BAKFlip F1 part #BAK772133 installed on a similar Chevy Silverado 3500HD short bed like your 2023 model for you to check out. You can see that the third brake light isn't blocked when it's folded up.